Counting matching models…
This wall mount is designed specifically for the TRMNL 7.5” (OG) DIY Kit. It allows you to securely mount your TRMNL device to a wall for a cleaner and more permanent installation. The mount consists of two printed parts, which are…
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
Updated 4/23/26 - Includes version that lets you keep the metal stand attached.
A solution for mounting your TRMNL og DIY KIT on a 10" rack with an additional button. You need: a few M3 and M2 brass insert glue M12 push button double sided tape and zipties for the batter This model can be printed on smaller printers…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…
Made this cases to replace the damaged NST case, and since its going to be used as a TRMNL screen with no user interaction removed all its buttons. There is a small hole in the back to reset the unit. It uses 2mm flat head screws, the…
Easily attached to the wall with 3M Command Strips. Try painting on organic supports for the “hook”. It is designed with enough tolerance to make it easy to take off and on but provides more support than just a single hook.
This is a faux nail head that supports 3m command strip for hanging a TRMNL device on the wall (see https://usetrmnl.com). The triangle nail head matches the triangular hole in the back of the TRMNL for easier alignment. The tolerances…
Enhance your TRMNL experience with these custom-designed mounts/stands, perfect for showcasing the sleek and minimalist E-Ink dashboard. These stands are tailored to accommodate two configurations: one for the Raspberry Pi Zero W and…
11.10.2025 update - added alternative V2 model with a less steep leaning angle.
A rather sturdy and secure magnet fridge mount for the original TRMNL eInk Display. I was looking for something a little beefier than the original TRMNL fridge mount (found in their GitHub) which I found to be a little too flexy for my…
A cover to change the color of your TRMNL without having to remove it from the case. You can add custom text in your slicer. I used OrcaSlicer Text Tool, font Helvetica Neue, 70% height
What you need The TRMNL device , obviously 4 times 10 x 2 mm neodymium magnets (e.g. these ) Optionally, ≤ 60 mm of thin steel wire Printing & assembly Print the plate . A .15 mm layer height is recommended, so that you get 2 layers below…
Minimalist mount to secure TRMNL to a standard 19" rackmount blank plate. Uses 2x M5 Socket Hardware: 2x M5 x 10mm socket head screws; 2x M5 Nuts (standard M5x0.8mm thread). Designed to perfectly fit the hex grid spacing of THIS specific…
Design Goals Flexible Use the TRMNL button while mounted! Supports both magnets and command strips Free parameterized Fusion360 model Sturdy and Stable Solid contact with both TRMNL and mounting surface Locks into TRMNL hanging hole…
Combination Magnetic & Skadis mount for the TRMNL. You could print half for only the magnetic mount, or all for the skadis option. No supports needed! Magnets press fit in so no need for glue either! Locking pin to hold plate onto the…
It kinda fits: waveshare 7.5" e-ink screen with Raspberry Pi HAT (Waveshare 13504) https://www.waveshare.com/7.5inch-e-pap Seeed Xiao ESP32-C3 - WiFi/Bluetooth - Seeedstudio 113991054…
This is the first 3D-printed enclsoure featuring a triangular prism-like shape rear support for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…
This is the second 3D-printed enclsoure, featuring a wide base and a gently slanted backrest for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…
All other models I found made the TRMNL stick out too much or used magnets that I didn't have on hand. This one uses 6x2mm magnets (stacked twice) and has a thickness of a just a few layers. The model attaches to the TRMNL with double…
This is the upgraded 3D-printed enclsoure featuring a triangular prism-like shape rear support with margin for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It…
This is a very simple refrigerator magnet mount for the trmnl e-ink display. It uses 4 small round magnets (8mmx3mm) that are super-glued into the base, as well as an M2x6 bolt that is used to hold on to the trmnl device itself. The mount…
This wall mount is designed specifically for the TRMNL 7.5” (OG) DIY Kit. It allows you to securely mount your TRMNL device to a wall for a cleaner and more permanent installation. The mount consists of two printed parts, which are…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
Remix of the enclosure for the 7.5 inch TRMNL epaper kit.
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
This is the my 3D-printed enclosure for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL. It requires no adhesive or screws as it is designed to be press-fit together. All buttons are usable with the case and…
Updated 4/23/26 - Includes version that lets you keep the metal stand attached.
This modified backplate is designed to improve usability and everyday handling of the TRMNL / XIAO 7.5” ePaper picture frame DIY kit. The modification allows full access to the control buttons and the Inkpad charging port without the need…
TRMNL OG Kit Base (Seeed Studio) This is a custom base designed for the TRMNL OG 7.5" DIY Kit from Seeed Studio . The base is made of two simple, easy-to-print parts and requires no supports . The design focuses on clean assembly and…
TRMNL Desktop Stand – Waveshare 7.5" E-Paper Display This TRMNL desktop stand is a sleek, low-profile enclosure designed to display a Waveshare 7.5" e-paper screen at a comfortable viewing angle. It securely houses the Waveshare e-paper…
This is a custom-designed enclosure for the TRMNL 7.5" (OG) ePaper Display DIY Kit by Seeed Studio . I created this model because I couldn’t find an existing case that met my expectations in terms of design, proportions, and simplicity.…
A solution for mounting your TRMNL og DIY KIT on a 10" rack with an additional button. You need: a few M3 and M2 brass insert glue M12 push button double sided tape and zipties for the batter This model can be printed on smaller printers…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…
Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…
While there are plenty of TRMNL stands and cases, i wanted something that i can hook into the slots of an IKEA SKADIS panel, and also attach any other kind of mount i come up with. The USB-C port, power switch and all buttons are…
Idea After having printed @FliesWithWind's beautiful DIY TRMNL enclosure and with good success on my whiteboard, I wanted another mounting option. The requirements were: Easily removable device for charging or relocating Mountable via…
This is an E-Ink display running on ESPHome firmware, designed to display information from your Inker server and managed by Home Assistant . The project was not created by the ESPHome or TRMNL team and is not affiliated with them.…
Made this cases to replace the damaged NST case, and since its going to be used as a TRMNL screen with no user interaction removed all its buttons. There is a small hole in the back to reset the unit. It uses 2mm flat head screws, the…
This is a minimal DIY TRMNL stand compatible with an 7.5inch epaper display and Seeed Studio EE04 or EN04 driver boards with an 18650 battery.
All of the purely 3D printed options for frames for the Seeed Studio TRMNL kit were, in my opinion, ugly and/or hard to print. After trying a couple of those, being dissatisfied with them, and with aesthetics in mind, which is really half…
Low profile wall mount for the TRMNL X, sticks out just 3.5 mm instead of the 20mm regular mount. Fits 4 10mm x 2mm magnets, to make sure the device can't accidentally fall off. Attach to the wall with screw or doublesided tape.
Replace an blank wall plate to mount your TRMNL X on your wall without any additional modifications. Sleek and easy.
