Flexi Farmyard Cow, Print in Place Wiggler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chunky flexi farmyard cow that prints in place with no supports. AMS multicolour and single colour versions included.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
Say hello to a chubby little flexi cow that prints in one go, fully assembled, straight off the plate. The segmented body gives it a proper waddle when you pick it up, and that oversized pink snout and pair of cream horns give it loads of personality for something so small. There are no supports and no glue, so it's a lovely one to run if you're still finding your feet with your printer. Two versions are included: an AMS multicolour build for the full colour look you see in the photos, and a single colour version if you're running one filament.
The AMS version handles the eyes, snout, horns and hooves through colour changes, so there's nothing to insert or paint afterwards. If you're printing single colour, it still reads brilliantly in a warm brown or a soft cream, and a bit of hand painting on the snout and eyes is an easy weekend job if you fancy it. Scale it up for a chunky shelf piece or shrink it down for a desk companion, though very small scales will make the joints tighter, so give it a test at your chosen size first. Print a few in different filaments and you've got yourself a small herd.
Filament Colour & Material
PLA is all you need here. It prints cleanly, holds the joint tolerances well and keeps the surface nice and smooth.
For colours, a warm milk chocolate brown with cream horns and a pink snout gives you the look in the photos. A classic black and white dairy pattern also works beautifully if you're running AMS, and a single colour cream or sand finish looks lovely and understated on a shelf.
Print Settings
Layer height: 0.16mm
Infill: 15%
Supports: None needed
Wall line count: 2 or more
Line width: 0.6mm for default, initial layer and outer walls
Print in place: Yes, no assembly or glue required
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: