1 / 4
Flexi Farmyard Cow, Print in Place Wiggler — zdjęcie 1
1 / 4

Flexi Farmyard Cow, Print in Place Wiggler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chunky flexi farmyard cow that prints in place with no supports. AMS multicolour and single colour versions included.

Ocena
0 / 5
Polubienia
5
Pobrania
39
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Animals
Licencja
Standard Digital File License

Say hello to a chubby little flexi cow that prints in one go, fully assembled, straight off the plate. The segmented body gives it a proper waddle when you pick it up, and that oversized pink snout and pair of cream horns give it loads of personality for something so small. There are no supports and no glue, so it's a lovely one to run if you're still finding your feet with your printer. Two versions are included: an AMS multicolour build for the full colour look you see in the photos, and a single colour version if you're running one filament.

The AMS version handles the eyes, snout, horns and hooves through colour changes, so there's nothing to insert or paint afterwards. If you're printing single colour, it still reads brilliantly in a warm brown or a soft cream, and a bit of hand painting on the snout and eyes is an easy weekend job if you fancy it. Scale it up for a chunky shelf piece or shrink it down for a desk companion, though very small scales will make the joints tighter, so give it a test at your chosen size first. Print a few in different filaments and you've got yourself a small herd.

Filament Colour & Material

PLA is all you need here. It prints cleanly, holds the joint tolerances well and keeps the surface nice and smooth.

For colours, a warm milk chocolate brown with cream horns and a pink snout gives you the look in the photos. A classic black and white dairy pattern also works beautifully if you're running AMS, and a single colour cream or sand finish looks lovely and understated on a shelf.

Print Settings

  • Layer height: 0.16mm

  • Infill: 15%

  • Supports: None needed

  • Wall line count: 2 or more

  • Line width: 0.6mm for default, initial layer and outer walls

  • Print in place: Yes, no assembly or glue required

Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: 

https://www.patreon.com/cw/FolkandForge

Tagi