1 / 1
Apollo MSR-2 tilted corner wall mount — image 1

Apollo MSR-2 tilted corner wall mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A corner wall mount for the Apollo Automations MSR-2 mmWave presence sensor, with 30º downwards tilt

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

An external housing to wall-mount the Apollo Automations MSR-2 mmWave presence sensor in a corner, with 30º downwards tilt. This align with the vendor's recommendation to fix at 1.5-2m height. I filleted the back to allow for a bit of corner tolerance, and mounted with command strips.

I printed mine with PLA+ at 0.2 layer height with organic supports. It's a small part, so bed adhesion is tricky. I had best success adding a decent amount of brim (7mm) and similar first layer expansion for the supports, and printing the rectangular front face flat-to-bed (so the rounded corner piece was pointing up). Thanks @earu for the source model.