L-Boxx adapter for Qbrick Pro Toolbox system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy duty adapter for stacking L-Boxx toolboxes on top of Qbrick Pro toolboxes. Around 40g PETG, with minimal supports.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 62
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
I printed the final version in PETG with 25% gyroid infill. This adapter should be quite heavy duty, I calculated the gyroid infilled printed version with Prusament PETG to have a failure load of around 250 N per adapter, so 50kg of toolboxes under the adapter should be possible. Ideal CAD geometries showed a peak of 20,5 MPa at that lifting load. Although not recommended, I didn't manage to break my 5% infill PLA prototypes either...
Supports are only needed in a few places and cannot be avoided unfortunately. The red marked areas can be printed without supports easily, at least by a Prusa CORE One.