Pool-Safe Hose Couplers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d-printable hose couplers for use with chlorinated water
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 32
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Screw on hose ends for most garden hoses.
These were specifically designed for use with chlorinated pools. Standard brass or copper fittings do no mix well with chlorinated water. The chlorine will eventually break down the copper, and leach chemicals into the pool (which can turn swimmer's hair green!). Of course, these can be used for non-pool uses as well.
Pick the filename that matches your inside and outside diameters, where the outside diameter of the stl filename should be at least as large as your measured diameter. (if the outer diameter of the stl file is smaller than you hose, your hose will not fit...).
Print this using ASA with a 1.05 extrusion multiplier. You can also use PETG but beware that PETG can degrade due to exposure to UV light.
There is also a washer included which can be printed in TPE, or TPU -- but you're better off using a rubber washer from the local hardware store, as these will last longer when exposed to chlorine.