1 / 7
Amber Mosquito Pendant — Mosquito Suspended Inside a Translucent Lump, 2-Colour, No Supports — image 1
1 / 7

Amber Mosquito Pendant — Mosquito Suspended Inside a Translucent Lump, 2-Colour, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mosquito embedded inside a lump of translucent 'amber'. Two filaments, no cavity and no glue

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A mosquito suspended inside a lump of translucent "amber" — printed in two filaments on an AMS/multi-material printer. 33 x 30 x 7.5 mm, 3.5 mm bail hole, no supports, nothing to assemble.

Read this first

FDM "transparent" filament is translucent, not clear: light scatters at every extrusion boundary. The insect reads as a soft, shadowy shape with depth, strongest when you hold the pendant up against a window or a lamp. It is not a crisp black silhouette and it never will be at this scale. The sanding + clear-coat step below is most of the effect, not optional polish.

There is no cavity

amber.stl is a plain solid lump; mosquito.stl is a second solid occupying the same space. The slicer resolves the overlap in favour of whichever part is listed LAST, so the mosquito wins its own volume and the amber prints around it. That is also why it ships as two separate STLs rather than one combined file — a fully enclosed inclusion is a sealed internal void, and "Split to Parts" splits by connected component and ignores solid names, so the void would come back as a positive solid and the cavity would be silently refilled.

Slicing it

In Bambu Studio / Orca: import BOTH STLs together, answer Yes to "load as a single object with multiple parts?", then confirm the order is amber first and mosquito second. Reversed, the amber wins the overlap and you print a plain blank pebble — and it looks completely normal in the preview. Assign translucent to the amber and dark to the mosquito, then scrub the sliced preview to layer 30-42 and watch the insect appear and disappear.

The depth budget

Up to 1.5 mm of amber over the insect reads crisp but printed-on; 2 to 3 mm is soft-edged with visible depth, which is the target; 4 to 5 mm is a grey smudge; 6 mm and over is gone. So the insect is squashed into a 1.7 mm flat band biased toward the top face, leaving a median 1.9 mm of cover and the rest of the lump behind it as depth. Depth is only half the story though: the first version sat squarely in the 2-3 mm band and still read as barely-there, because the insect covered only 9 percent of the pendant's face. What fixed it was area and mass — 18 percent coverage and 2.9x the material.

Print settings — they matter more than usual here

Translucent PETG or PLA. Layer height 0.10 to 0.12 mm. Infill 100 percent — do not print this at 15 percent, it is the single most common way to end up with a milky pebble, because the sparse infill grid sits between your eye and the insect. 3 or more wall loops. Nozzle 255 to 265 C for PETG. Around 30 mm/s. Part cooling off or 10 percent max. Rectilinear infill alternating 45/-45. No supports, no brim.

Purge is the real cost

Dark to translucent is the worst swap direction there is. Set the flush volume for dark to translucent to about 500 mm3 (the ~280 default is not enough), enable purge into object infill, and make the translucent filament the base so tower contamination lands in the dark filament instead of in the amber. About 28 swaps across 14 layers, so expect 10 to 14 g of purge for a 5 g part. That is normal.

Finishing is the step that makes it amber

Wet sand the top face 400, 800, 1000 grit, keeping it flat — do not round the rim, the lobed outline is the shape. Wipe clean and dry. Then brush a thin coat of clear epoxy or UV resin over the top face and let it self-level; this fills the surface micro-valleys that scatter light. The inclusion looks roughly twice as deep and twice as sharp after coating, so judge the model after this step, not before.

Fully parametric OpenSCAD source is included. The complete print and finishing guide is the description you are reading — nothing is held back.

Tags