P
Printablesnick041696
Velociraptor Resonating Chamber
It does make noise, you cover the right hole on the chamber and you blow.
- Downloads
- 6,885
- Likes
- 816
- Rating
- 4.7
Search results: amber
Counting matching models…
P
Printablessuit
Chamber Fan Duct for P1P/P1S (no support)
The original Chamber Temperature Regulator Fan is controlled via GCode - but the fan duct is not present on the P1P (neither is the opening on the back). This duct allows you to use the stock official X1 Fan from the Bambu Lab Store in…
- Downloads
- 4,148
- Likes
- 470
- Rating
- 4.95
P
Printablesquibeck
6-chamber whistle guaranteed +122 dB V6 DANGER!!!
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 124 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
- Downloads
- 3,213
- Likes
- 425
- Rating
- 2.13
P
Printablesquibeck
mini whistle 2-Chamber, high decibel
2-Chamber High-Decibel Whistle This is a compact, high-performance whistle engineered with four distinct acoustic chambers. It is designed to maximize volume and create an attention-grabbing, multi-tonal sound signature. I added a…
- Downloads
- 2,953
- Likes
- 473
- Rating
- 3.44
P
PrintablesLemanito
Bambu Lab X1C chamber base insert
I took inspiration from another design that has two parts. However, it didn't align perfectly with my printer. Although it might seem similar, I created this design from the ground up. It's 1 mm shorter in height, 1 mm broader, and has a…
- Downloads
- 2,315
- Likes
- 509
- Rating
- 4.93
P
PrintablesJamie
Multi-chamber Box with Clasp and Good Separation
The translucent bins with little removable dividers are HORRIBLE when it comes to keeping parts separated. When closed, parts can jump between bins, which drives me CRAZY. This design intends to fix that. At the top of each wall is an…
- Downloads
- 2,287
- Likes
- 799
- Rating
- 4.79
P
PrintablesHenryA
Voron Chamber Thermistor Mount 2020 extrusion
This model is a remix from Maple Leaf Makers and the excellent V0 chamber thermistor mount. Just adapted to the 2020 extrusions fitted for the Voron 2.4/Trident . BOM 1x M3x8mm BHCS/SHCS 1x M3 T-Nut 1x 3x15mm thermistor
- Downloads
- 2,207
- Likes
- 295
- Rating
- 4.96
P
PrintablesNiSE
9mm Chamber Flags
A simple 9mm chamber flag for chamber flagging purposes. Print bullet tip up with high or 100% infill at least up to the arm since it needs as much plastic as possible so it doesn't compress or get crushed. These were made to be able to…
- Downloads
- 2,060
- Likes
- 288
- Rating
- 4.9
P
PrintablesCobwebblox
Valorant Chamber pistol / sheriff / headhunter
The agent chamber (from the game valorant) pistol / sheriff / headhunter. Supports recommended This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this…
- Downloads
- 2,050
- Likes
- 100
- Rating
- 5
P
PrintablesPeter
Referee Coach Whistle with 3 chambers
Pealess referee whistle with 3 chambers. Sound power level up to 120 dB. The frequency should be 3520 Hz +- 220 Hz. Print with support touching build plate only. (Check your slicer settings) Print Settings Printer: Anycubic I3 Mega Rafts:…
- Downloads
- 2,025
- Likes
- 93
- Rating
- 4.85
P
Printablesexakel
Valorant Chamber Headhunter Pistol
This is a multi-part version of Chamber's Headhunter heavy pistol that I have split into the 3 component colours of the stock appearance: gold, black, and white. Print settings in image 0.15mm layer height (you can get away with 0.2mm)…
- Downloads
- 2,025
- Likes
- 231
- Rating
- 5
P
Printablesskore87
AR-15 Chamber Flag for 5.56 .223 .300
I took the SAAMI specs and designed a chamber flag that will accurately index in the same place regardless if you use .223/5.56 or .300 Blackout. Because it indexes on the datum line of each cartridge it will always stick out the same…
- Downloads
- 1,743
- Likes
- 242
- Rating
- 5
P
PrintablesMaybeSpooknik
Qidi Plus 4 Rear Chamber Cover
This is a simple print that allows you to cover the rear slot in the back of the chamber. This seals the chamber up even more and blocks the air coming from the mainboard chamber. Helpful when you are running the mainboard 80 mm fan mod .…
- Downloads
- 1,607
- Likes
- 180
- Rating
- 4.93
P
PrintablesCobwebblox
Valorant Chamber sniper
Chambers sniper from the game valorant This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. https://www.riotgames.com/en/legal
- Downloads
- 1,607
- Likes
- 88
- Rating
- 5
P
Printablessthompson
Double Chamber Ocarina
A double chamber ocarina based on this model file. The only change is that I added in the second thumb hole for the right thumb on the larger of the two chambers. I printed with 100% infill and supports.
- Downloads
- 1,602
- Likes
- 149
- Rating
- 4.43
P
PrintablesDav3d
Whistle 4 Chambers over 100db (updated)
print in PETG or PLA. no resin recommendet
- Downloads
- 1,577
- Likes
- 211
- Rating
- 2.33
P
Printableszeroflow
AR-15 .223 Chamber Flag
A simple chamber flag made for the AR-15. Glue a cut down spent .223 case into the bottom of the chamber flag to make it extract like a real case when pulling the charging handle. Do not insert when hot! Hint: From what I know, this is…
- Downloads
- 1,385
- Likes
- 204
- Rating
- 4.88
P
Printableszwirek2201
Chamber Fan Duct for P1P/P1S - no supports
Just a quick remix (of the 38mm version) to be able to print the duct with no (or pretty much no) supports. Print it vertically and the only places where you can add minimal support are insert slots, I printed mine with no supports at all…
- Downloads
- 1,322
- Likes
- 117
- Rating
- 4.87
P
PrintablesIce992
K2 Plus CFS Mod - Heated Chamber - Space Pi Double
I decided to build this mod for the CFS just to see if it could be done. Like many of you, I received the Space Pi dual roll filament dryer with my K2 Plus preorder. I have multiple other filament dryers, and really no use for another…
- Downloads
- 1,210
- Likes
- 494
- Rating
- 5
P
PrintablesYoupak
Bambu Lab X1C P1P Spoiler / Chamber Waste recovery for debris removal
A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…
- Downloads
- 1,207
- Likes
- 155
- Rating
- 4.5
P
PrintablesDuckMeat
Bambu X1/P1S Chamber LED Riser Upgrade (Reinforced)
Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…
- Downloads
- 1,197
- Likes
- 255
- Rating
- 4.95
P
PrintablesNoizie Works
Qidi Plus 4 chamber heater shell replacement
UPDATE: I have replaced the files with STEP so it's easier to remix as QIDI changed up the mounting locations and i don't have acces to this data. Attempt this fix at your own discretion! Only work on the heater with the power off and the…
- Downloads
- 1,097
- Likes
- 217
- Rating
- 4.67
P
Printablespolyfractal
Space Shuttle Main Combustion Chamber
Somewhat faithful replica of the RS-25 main combustion chamber (Space Shuttle's engine). It was designed for conventional machining, but should print ok too especially if done in resin. The threads are #0-80 so likely won't print well on…
- Downloads
- 1,012
- Likes
- 86
- Rating
- 5
P
PrintablesAksup
AR-15 .223 Rem 5.56 Nato Chamber clear flag
Chamber clear flag for AR-15 modelled after .223 Remington/5.56 Nato round specifications.
- Downloads
- 963
- Likes
- 200
- Rating
- 4.33
P
PrintablesMaple Leaf Makers
V0 Chamber Thermistor Mount
V0 Chamber Thermistor Mount A mount for a standard 3x15mm cartridge thermistor on 1515 T-Slot Extrusion Designed for the Voron V0 BOM 1x M3x8mm BHCS 1x M3 Nut 1x 3x15mm thermistor The most up-to-date version of this mod can always be…
- Downloads
- 948
- Likes
- 163
- Rating
- 5
P
Printablesmrgnarvar
Centauri Carbon Heated Chamber Mod
Updates: After printing mine, I realized my 6mm x 2mm magnets were too weak. The heater is held to the wall but uses the power cord to stay up, added a 10mm and 8mm magnet version Added a clearance hole for the heater button Added a 2mm…
- Downloads
- 921
- Likes
- 232
- Rating
- 5
P
PrintablesLars Becker
Bambu Lab P1P back/rear panel/cover for chamber fan installation
Latest Update: 10.07.2023 - Issue with the mounting location of the AMS filament buffer: In the previous files, the recess for the filament buffer did not align properly with the printer's frame. This caused the backplate to bend and…
- Downloads
- 919
- Likes
- 161
- Rating
- 5
P
PrintablestbkMAKER
Creality K1/K1C/K1 Max Chamber Thermistor Cover
This is a fix to a problem you didn't realize you had! *****PLEASE READ THE FOLLOWING BELOW. THIS GOES INTO FURTHER DETAIL AS TO WHY THIS PART IS IMPORTANT/USEFUL***** The K1 Series printers chamber thermistor is in a direct path to where…
- Downloads
- 914
- Likes
- 158
- Rating
- 5
P
PrintablesMatyáš Flek
chamber X ultimate valorant sniper rifle
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
- Downloads
- 872
- Likes
- 41
- Rating
- 0
P
PrintablesJace
Multi-chamber Box with Clasp and Good Separation Small Compartment Remix
I absolutely LOVE the box design from @Jamie and really wanted a version with all small compartments of the same size. So I made it in TinkerCAD real quick. I've also included the 3 pieces in separate files, as well as a file with all 3…
- Downloads
- 856
- Likes
- 259
- Rating
- 4.5
P
Printablesscottofazphx
P1P ARC Remix Enclosure 100% printable with Chamber Fan
Remix of the awesome ARC enclosure. This enclosure will be 100% printable. Uses the OEM door and top glass, and hinges that can be purchased from Bambu. Includes side panels, Rear chamber fan with temperature control and many more smaller…
- Downloads
- 843
- Likes
- 194
- Rating
- 4.4
P
PrintablesSabre Design
Bambu lab X1C P1P P1S Base Edge Ramp / Insert | Filapoop scoop | Chamber ramp easy debris removal | one piece
Base ramp insert for easy filament debris removal, one piece design. Can be printed in one piece on the bed of X1C, P1P and P1S. Designed for optimal fit and easy install. Best in PETG for temperature resistance, added print profiles to…
- Downloads
- 840
- Likes
- 94
- Rating
- 4.44
P
PrintablesIbot_3D
Voron Chamber Temperature Sensor Mount
Simple Mod to mount a temperature sensor to the gantry
- Downloads
- 822
- Likes
- 118
- Rating
- 5
P
PrintablesDanB
Ruger 10/22 Magazine Block Empty Chamber Indicator
This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.
- Downloads
- 805
- Likes
- 111
- Rating
- 5
P
PrintablesMatyáš Flek
chamber valorant
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
- Downloads
- 743
- Likes
- 33
- Rating
- 0
P
PrintablesROPI
Herb Grinder ROPI with Stash Chamber V2
⚠ Note: This is the second version of the ROPI grinder. It introduced the top stash chamber and major usability upgrades. If you want the latest and fully refined version with further durability, smoother grinding, and overall polish,…
- Downloads
- 740
- Likes
- 86
- Rating
- 5
P
PrintablesSTORM DESIGN
Bambu Lab Chamber Fan Cover - Compatible with AMS HUB
Hello Everyone I am sharing a model of the chamber fan cover of my design. I tested other models but found that they significantly reduce airflow. In my opinion, this may cause the fan to wear out faster and the return of fumes to the…
- Downloads
- 733
- Likes
- 173
- Rating
- 5
P
PrintablesGoatGamez
Amber - Brawl Stars
Amber brings the heat, literally! She's overconfident about her fire abilities despite being a bit of a klutz. With her, it's spectacle first, and safety last.
- Downloads
- 727
- Likes
- 50
- Rating
- 5
P
PrintablesTimo_boese
Voron V0.2 chamber thermistor mount
I chance the mount from HenryA a little bit to fit on my v0.2 with the 1515 extrusions and a 3mm thermistor the Thermistor fits very good on my print. if yours to tight you can open the hole a bit with a drill bit
- Downloads
- 700
- Likes
- 139
- Rating
- 5
P
PrintablesLewisFab
Chamber Flag - Curved
Remix of Captain_Fantastic's Chamber Flag but with a slight curve to stay in the barrel more securely. Printed with PETG so the material can flex a bit without breaking. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
- Downloads
- 691
- Likes
- 54
- Rating
- 4.86
P
PrintablesSTprinting
Bambu Lab Chamber fan muffler
I used similar chamber design to that of a car muffler to reduce the noise from the chamber fan. I used other models to get good magnet locations, so I credited them for a remix. I used 6x3mm N52 magnets. There is a very noticeable…
- Downloads
- 680
- Likes
- 131
- Rating
- 5
P
PrintablesJace
Multi-chamber Box with Clasp and Good Separation Large Compartment Remix
I absolutely LOVE the box design from @Jamie and really wanted a version with a few more large compartments. So I made it in TinkerCAD real quick. I've also included the 3 pieces in separate files, as well as a file with all 3 items in…
- Downloads
- 671
- Likes
- 218
- Rating
- 0
P
Printablesstew675
Qidi Plus 4 Chamber Temperature Probe Mount
This model and associated optional configurations are the result of months of trial and error work to improve the chamber heater behaviour of the Qidi Plus 4. The stock chamber thermal probe is located under the frame rail to the…
- Downloads
- 658
- Likes
- 90
- Rating
- 4.67
P
PrintablesBurgessG
Chamber Flag / 9mm / Half-Moon (v2)
I needed some chamber flags so I adopted an earlier lollipop design into this non-snag half moon design which also utilizes some recessed lettering that you can blacken out. I used both PLA and ABS, 50% infill and anywhere from .15% to…
- Downloads
- 642
- Likes
- 70
- Rating
- 5
P
Printablesscooter_magavin
Ruger 10/22 magazine chamber flag with and without key ring updated
This is made for my Ruger 10/22. It goes into the magazine well and locks in like a standard magazine but it keeps the bolt locked open. It's a different style of chamber flag. I made changes to the flag for a much better fit in ver 2. In…
- Downloads
- 639
- Likes
- 52
- Rating
- 5
P
PrintablesMiniWorld3D
Hyperbolic Time Chamber - Dragon Ball Z (Multipart)
Train your mind, body and spirit 🐉 Dragon Ball Z fans, here's an awesome diorama for you! ⌛ This multi-part model was created by MiniWorld3D member Kuma , allowing you to print in full color with a regular setup and assemble later. The…
- Downloads
- 635
- Likes
- 284
- Rating
- 5
P
PrintablesSquibsCorp
Cult of the Lamb - 25mm Base for Lambert (Cult of the Lamb)
Base for Lambert (Cult of the Lamb). Remix for https://www.thingiverse.com/thing:5445111 I'm not sure if the above is the original of this model, that's the one I found when I made this base however. I originally uploaded this to…
- Downloads
- 624
- Likes
- 110
- Rating
- 4.8
P
PrintablesNexGen-3D-Printing
NexGen3D: Chamber Heater
Im proud to release the version 1 of my universal chamber heater, the control system and power setup will be up to you, I will add these details later on the next version. BOM: 1 x 24v 7530 Dual Ball Bearing GDStime Blower Fan…
- Downloads
- 617
- Likes
- 313
- Rating
- 5
P
PrintablesNairod
Bambu Lab X1 X1C Chamber Fan Muffler No Support
Works best with Neodymium magnet grade N52 Just filleted the inside to make it easier to print without support Original file : https://www.printables.com/model/350953-bambu-lab-chamber-fan-muffler No support is needed for this print. But…
- Downloads
- 607
- Likes
- 86
- Rating
- 5
P
PrintablesElothan
9mm Chamber/Safety Flag
A quick chamber flag I made for use with 9mm Handguns/PCC. Print in a suitable colour, I like to use orange PETG for the added heat resistance. A shorter version is also added.
- Downloads
- 607
- Likes
- 67
- Rating
- 5
P
PrintablesTareku
Snapmaker U1 Mainboard & PSU Cooling Brackets for Noctua NF‑A9x14 Fans + Chamber Insert/Divider
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
- Downloads
- 598
- Likes
- 119
- Rating
- 5
P
PrintablesSuperTed
12 Gauge Chamber Flag
I lost my chamber flag for my shotgun so instead of buying a new one I just made my own! If you're importing the .stl file(s), then the Basic versions don't need any supports. However the CLEAR version will need supports for the raised…
- Downloads
- 579
- Likes
- 93
- Rating
- 4.6
P
Printablesfrause
Chamber light mount INDX Core One
Replace the original nozzle seal holders and mount the chamber light bar where it used to be for better lighting on the first layers. The metal bar with the chamber light snaps into place and no additional hardware is needed. Confirmed to…
- Downloads
- 578
- Likes
- 204
- Rating
- 4.96
P
Printables43D PRINT
ProWin style M4 AR Hopup chamber airsoft
Hop up chamber copy of Prowin with little improvements - longer protrusion for magazine 0,5 mm longer - wall where is thread from side is 0,2mm increased because printer cant print soo thin wall -wall of main tube in front of chamber unit…
- Downloads
- 566
- Likes
- 67
- Rating
- 0
P
Printableszemlin
Creality K2 Plus Chamber Heater Recirc Mod
Updated - On my second K2 the 90mm fan spacer interfered a bit with the purge chute, so I opened up the clearances around that a bit more. It wasn't sitting right on the can and got pushed in enough to interfere with the blades and cause…
- Downloads
- 565
- Likes
- 121
- Rating
- 5
P
PrintablesSaull
Fluval evo 13.5 chamber 2 filter basket
This basket replace the stock filter in chamber 2 of the fluval evo 13.5 reef aquarium. With the new rooting, the filtration si more efficent. Edit : Revison 2 to include thiker wall for printing easier
- Downloads
- 551
- Likes
- 30
- Rating
- 0
P
PrintablesArctic 3D Prints
9mm chamber safety flag
Blocks chamber and gives a visible indicator that the pistol is empty and safe. Pattern for easier grip on each side of the flag. Caliber is imprinted on the top part of the flag. Printed and test fitted with eSun PETG and eSun PLA+
- Downloads
- 533
- Likes
- 66
- Rating
- 5
P
PrintablesInevergiveup
Bambu X1C & P1P Chamber Desiccant Trays
Update: 05/10/23 As Requested added lift tabs to get the covers off easier. Position the tabs towards the back of the printer. Added the .Stp, .Ipt, & .STL files Top left with Tab, & Top Right with Tab. These are also now in build plate 2…
- Downloads
- 530
- Likes
- 91
- Rating
- 4.5
P
PrintablesAnubis
Handgun 9mm chamber safety flag - remove before Pew Pew - Walther PDP F-Series and CZ Shadow 2 Compact
English Version: Hello everyone, this is my second model, which was created on the basis of a template published here. It is a visible indication that the handgun is empty and therefore safe. A friend of mine needed some that would fit…
- Downloads
- 521
- Likes
- 100
- Rating
- 5
P
Printablesquibeck
two-chamber whistle guaranteed +124 dB V4 DANGER!!!
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 122 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
- Downloads
- 518
- Likes
- 85
- Rating
- 4.6
P
PrintablesMichael Hathaway
![Qidi Plus 4 Safer Chamber Heater [Updated]](https://media.printables.com/media/prints/1063634/images/8049273_cb181092-f34b-4857-8f42-249d8d05654f_d6c7f8bf-32c3-40c1-90f4-f35553f6bfa7/2024-11-05_10-15-55.jpg)
Qidi Plus 4 Safer Chamber Heater [Updated]
Remix of Noizie Works awesome chamber heater shell replacement, with several design improvements. He has given me his blessings to remix the hell out of this. Removed previous thermocoupler wire path. Added through barrier wire path.…
- Downloads
- 510
- Likes
- 118
- Rating
- 5
P
PrintablesROPI
Herb Grinder ROPI with Stash Chamber V4
🚀 The most advanced ROPI grinder yet — refined design, durable build, flawless grinding, and easy printing. ⚠ Note: This is the latest and fully refined version of the ROPI grinder. If you want the best combination of design, durability,…
- Downloads
- 508
- Likes
- 51
- Rating
- 4.83
P
Printablesmind-invader
Scrubby for Bambu Lab X1C X1 P1P P1S (Chamber Filter Duct)
This is tested and installed on my P1P, and I am happy to inform you all that it works well! Please note, this is not an ‘exhaust’ duct. It is meant to recirculate the chamber air after filtering. I reverse-engineered this from a friend's…
- Downloads
- 508
- Likes
- 169
- Rating
- 5
P
PrintablesCeceka1
Valorant Chamber's card
You can do 2 colour print or 1 colour both are ok. Just downscale length to 76,7mm.
- Downloads
- 494
- Likes
- 62
- Rating
- 5
P
PrintablesReProps
Kyber Crystal Chambers
These are homemade kyber crystal chambers for a lightsaber. The pieces may need to be split for optimal printing and support removal. Here’s my painting and build vid, https://youtu.be/uqdFsb9ekY8 . If you guys liked this file, be sure to…
- Downloads
- 488
- Likes
- 202
- Rating
- 5
P
PrintablesAleksander Spyra
![Tamiya TT01 Rear Uprights [Toe, Camber adjustable]](https://media.printables.com/media/prints/119961/images/3518193_31bc09b1-6ae1-4a2d-9feb-f5442f1e1619/20220117_115536.jpg)
Tamiya TT01 Rear Uprights [Toe, Camber adjustable]
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
- Downloads
- 479
- Likes
- 52
- Rating
- 5
P
PrintablesTriple G Workshop
4 chamber pill box 🞧 2 color or single 🞧 Print in place
I also added a version without the pill on top. Enjoy! Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the MK3 jogs after a change it will spit out…
- Downloads
- 478
- Likes
- 66
- Rating
- 5
P
Printablesdgyenes
Rear panel with chamber fan for Bambu Lab P1P
Updates: 2023.03.29: In the ams version the wall was too thin in one place, this has been fixed. If you don't want to modify the original panel, print your own :) What you need? This fantastic chamber fan duct (designed by suit ) :…
- Downloads
- 476
- Likes
- 127
- Rating
- 4.75
P
PrintablesBakedBean3D
Compact Dual-Chamber Whistle V2
This is the second iteration of a compact and easy-to-print whistle that can also be batch printed due to being printed on its side. This takes less time to print and less filament than my first iteration , but you might like that style…
- Downloads
- 475
- Likes
- 32
- Rating
- 5
P
PrintablesBurgessG
Chamber Flag .223 / 5.56
This is a sturdy chamber flag for .223/5.56 rifles. I've used mine for years and have never had any issues and my original prototype is still in rotation. The barrel end allows for greater visibility and grip. Easy in/out. My original…
- Downloads
- 472
- Likes
- 72
- Rating
- 5
P
PrintablesGotIssuez
.308 Chamber Flag
I needed a chamber flag for my AR-10 but I couldn't find one that I liked so I remixed a .308 round model and my favorite AR-15 chamber flag and you get what we have here. Printed in Sunlu PLA Plus with 50% infill and 4 walls. Note: I…
- Downloads
- 454
- Likes
- 33
- Rating
- 0
P
PrintablesJeff McClain
FlashForge 5M Pro Chamber / Bed Fan Duct
I made this to try to deal with the tendancy of the right side of prints not looking as robust as the left side when printing overhangs. Specifically, my 3DBenchy's have a tendency to warp/melt a little on the bow overhang but ONLY when…
- Downloads
- 445
- Likes
- 138
- Rating
- 4.25
P
PrintablesJürgen
Core One Automatic Chamber Vent
A cheap-and-cheerful solution for automating the chamber vent setting, depending on the filament type used: Attach little tabs to the inside of the vent slider and to the Nextruder, and let the Nextruder push the slider in the right…
- Downloads
- 427
- Likes
- 275
- Rating
- 5
P
PrintablesFleeeinIan3D
Centauri Carbon 7.5 mm Panel Spacer with Wire Relief for Chamber Heater (Creality)
Before you print, please read everything below carefully... What: Based off of SE3Ds 7.5 mm panel spacer, I modified one of the lower pieces to have two wire relief holes to be able to route a creality chamber heater inside the printer.…
- Downloads
- 422
- Likes
- 62
- Rating
- 4.92
P
PrintablesKramer
Qidi Q2 Chamber Exhaust Fan Duct Coupler With Lip
This allows you to fasten a 3" flexible duct to the QiDi Q2 exhaust port. The original model that I remixed this from (thanks Weav ) was very good but I had already designed other duct work that had a lip at the end of the tube to “catch”…
- Downloads
- 395
- Likes
- 57
- Rating
- 5
P
PrintablesBillyBones
Valorant Chamber Keycaps
This was made because I couldn't find any free keycap designs on Thingiverse so here you go. Please let me know if you want me to make keycap sets for any other Valorant character's abilities. I will try to get back to you as soon as…
- Downloads
- 390
- Likes
- 23
- Rating
- 5
P
PrintablesRoan.S
Reaver Sheriff (Rotating Chamber)
I printed it in pla at 60% scale factor and only used supports for the chamber The included blocks are studs for the square holes in the back so you can snap it together or you can just glue it
- Downloads
- 389
- Likes
- 40
- Rating
- 5
P
Printablesscooter_magavin
Chamber Flag 22 caliber and up
I use this chamber flag in all of my rifles from 22 caliber and larger. I would recommend 100% infill. I've printed it in PLA and it works just fine. No supports needed. I print it with it pointed up.
- Downloads
- 377
- Likes
- 33
- Rating
- 5
P
PrintablesObiWanChernobyl
.22 LR chamber safety flag
A quick printing .22 LR chamber safety flag for competition pistols. Easy, strong and ergonomic design that is clearly visible. I use Prusa PETG Orange for excellent results. I use the following settings: - Layer height: 0.2 - Solid…
- Downloads
- 374
- Likes
- 28
- Rating
- 0
P
Printablesweav
Qidi Q2 Chamber Exhaust Fan Duct Coupler
Use to attach a 3 inch vent hose to the exhaust port on the Qidi Q2. You will need to stretch over the coupler as this is a bit larger than 3 inches but provides a snug fit to the hose. Printed in PETG. I used m3x8 self-tapping screws.
- Downloads
- 372
- Likes
- 50
- Rating
- 0
P
PrintablesArctic 3D Prints
.22 chamber safety flag
Blocks chamber and gives a visible indicator that the pistol is empty and safe. Pattern for easier grip on each side of the flag. Caliber is imprinted on the top part of the flag. Printed and test fitted with eSun PETG
- Downloads
- 368
- Likes
- 40
- Rating
- 4.8
P
PrintablesKalcemo
Bambu X1C Chamber Hygrometer
Model is designed to hold a hygrometer safely in the chamber of the Bambu X1 Carbon. Please double check that your side support has the stamped cavity before printing. The holder is designed to snap onto that cavity to stay secure.…
- Downloads
- 363
- Likes
- 69
- Rating
- 4.67
P
PrintablesCrambambuli
Voron 2.4 heated Chamber with Fans
This mod allow you to install two additional Fans under the bed. I am getting about +10°C 4x M3 Inserts.. to mount the Fans. (Voron BOM) 2x M3x8 (Voron BOM) 2x T-Nuts for 2020 Aluminum Extrusion (Voron BOM)
- Downloads
- 358
- Likes
- 95
- Rating
- 5
P
PrintablesTarz
AICS 308 CHAMBER FLAG
This is a remix of a chamber flag by theDude8102. I raised the lip for the mag catch a bit better in my son's Voodoo, and lengthened the flag to make it easier to grasp. V2 file has the Coast Guard emblem, V4 file is plain without any…
- Downloads
- 345
- Likes
- 15
- Rating
- 0
P
PrintablesBurgessG
9mm Chamber Flag / Lollipop / Recessed "9" / v2
This was my first attempt at a chamber flag. Worked very well and I've printed out many for both myself and friends. Never had an issue releasing the slide down onto the flag. Rounded “lollipop” design reduces snags. This version also has…
- Downloads
- 341
- Likes
- 37
- Rating
- 5
P
PrintablesBurgessG
Chamber Flag "Safe" for 1911 .45 (v2)
This is the second iteration of my .45 Chamber-Flag design. First was a lollipop that worked well but “sometimes” snagged on my pistol case so I came up with this rounded design and so far so good, zero snags. It also has the word SAFE on…
- Downloads
- 340
- Likes
- 68
- Rating
- 4.67
P
Printablesstew675
Qidi Plus 4 Lengthways Chamber Heater Casing
Replacement Chamber Heater Cover Unit for Qidi Plus 4 Model Update: I've added a revision to the original model that includes a more curved path towards the outlet which slightly improves the overall air-flow. These models will have the…
- Downloads
- 336
- Likes
- 112
- Rating
- 5
P
PrintablesCoordSpace
Qidi Q1 Pro Heated Chamber & Electronics Bay Vent
This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.…
- Downloads
- 328
- Likes
- 58
- Rating
- 5
P
PrintablesAndrey Puchkov
Chamber heater for FlashForge 5m
Нагреватель строго рекомендую печатать из термостойкого материала, в идеале не поддерживающего горение. При использовании нагревателя на 200 Вт рекомендую использовать внешнее реле на ток не ниже 20 Ампер Терморегулятор:…
- Downloads
- 322
- Likes
- 155
- Rating
- 5
P
Printablesadcurtin
Cover with passthrough close button for liftmaster / chamberlain 877LM garage door keypad
My garage door keypad, an 877LM, can close the garage door just by pressing the enter button, no code needed. When I walk the dog, or take a car not parked in the garage, I want to easily close the door on the way out, and was annoyed…
- Downloads
- 321
- Likes
- 34
- Rating
- 5
P
PrintablesMatyáš Flek
chamber Q ability valorant
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
- Downloads
- 319
- Likes
- 20
- Rating
- 0
P
PrintablesMarko
Storz & Bickel Filling Chamber Tool
Need a replacement stand/Filling Chamber Tool you could 3d print fdm by placing logo below plate and print flat, however better suited for resin printing
- Downloads
- 303
- Likes
- 35
- Rating
- 4.5
P
PrintablesKRZPrints
Bambu X1/P1S Chamber LED Riser (Philips Hue Lightstrip)
Full credit to dkarjadi for the original design and to DuckMeat for the reinforced remix. Why this remix? As I have replaced all the lights in my home with Philips Hue, I also wanted to control the lights on my printer using the same app.…
- Downloads
- 300
- Likes
- 47
- Rating
- 5
P
PrintablesDewey
Improved Chamber Cooler / Barrel Cooler | 6015 USB Fan
04/08/2025: I was going to print a barrel cooler using the 5015 fan when I saw the 6015 fan was a little cheaper and flowed 50% more air (2.9cfm vs 4.5cfm)! That's a big jump for only 10mm growth in size. These 3D printer fans flow much…
- Downloads
- 297
- Likes
- 31
- Rating
- 5
P
PrintablesRainer
Core One Automatic Chamber Vent Nextruder Lever Remix
Nexdruder Lever Mod from Jürgens Core One Automatic Chamber Vent.
- Downloads
- 290
- Likes
- 86
- Rating
- 4.94
P
PrintablesArek
Voron 2.4 Z Chain Guide Chamber Thermistor mount
Standard Voron 2.4 Z Chain Guide extended with thermistor (cylindrical type, 10mm x 3mm) mount. Thermistor is used as chamber thermistor. Thermistor secured with M2x5mm (BHCS would be best). Along with chamber fan:…
- Downloads
- 288
- Likes
- 44
- Rating
- 5
P
PrintablesRobert
Immunohistochemistry Staining Chamber for Medical Research (8 Slide Holder)
--UPDATE-- I realized in my initial upload I only included the latest version of the lid, which has dividers between the samples holders. I have now included the original flat lid that has no dividers in case this is useful for you. This…
- Downloads
- 279
- Likes
- 26
- Rating
- 5
P
PrintablesAndyprint_3D
Chamberlain Funk Handsender remote control
Bei den Chamberlain Fernbedienungen für Garagentore bricht sehr leicht der Hacken für den Schlüsselanhänger. Daher habe ich mir die Rückseite und den vorderen Clip gezeichnet und Gedruckt um diese Teile ersetzen zu können. Sparrt einem…
- Downloads
- 279
- Likes
- 16
- Rating
- 5
P
PrintablesjonnieZG
Retro Arms CNC Hopup Chamber - Improved tensioner nub and C-clip
Some issues of Retro Arms CNC hopup chamber come with a tensioner nub that is 0.5mm narrower than it should be, so it wobbles left-right a lot, making the hopup inconsistent. I made this model tighter so it remains in dead center. Also,…
- Downloads
- 278
- Likes
- 10
- Rating
- 0