1 / 1
1/8" x 3/8" Magnet INDX Tool Dock Core ONE/+ — image 1

1/8" x 3/8" Magnet INDX Tool Dock Core ONE/+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.69 – €3.29 net (excluding VAT)

For file: 4 Docks With Inserts V2.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.99 excluding VAT (range midpoint).

Weight reported by the author
57 g
Print time reported by the author
2.23 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Core ONE/+ tool dock model that uses 1/8" x 3/8" magnets. Available with and without heat-set inserts

Rating
0 / 5
Likes
5
Downloads
11
Makes
0
Views
177
Reviews
0

Updated at source:

Model information

License
Open Community License v1.1

I had to do a lot of troubleshooting to get my printer running after the INDX upgrade, and that involved a lot of dock location calibrations. I was worried about wearing out the cut threads on my original docks, so I decided to make my own docks, but I had a really hard time finding the 3x8 mm magnets in the US. I ordered the 1/8" x 3/8" magnets from the link below and made this dock for them. I have had no issues with loading or unloading the tools using these magnets. I have made 2 versions: one that has the same hole as the standard docks, and another that has a hole meant for 3x4x5 mm heat-set inserts like those used on Voron printers, in case you want a reusable thread.

EDIT: I have added another version for the model that uses heat-set inserts. I made it so there is plastic behind the insert, allowing the screw to bite into it and prevent loosening, while the insert prevents the risk of "stripping" the cut threads. 

https://www.kjmagnetics.com/d26-neodymium-cylinder-magnet

Tags