Arknights - Gracebearer Axe - WIP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Work In Progress Model of the Arknights character Gracebearer's Axe. Includes Screws and Dowels for large assembly.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
A recreation of the model made by https://www.reddit.com/user/AmberiusOnline/">AmberiusOnline. I had been attempting to contact them to use their beautiful model, but they no longer seemed to be active. I attempted to work backwards from their images to make an approximation - full credit goes to them.
This version was my first attempt at modeling. I used an AI Image to Mesh generator to get the approximate shape of the piece via Modly and the Hunyuan 2 Mini Model. Then I corrected the mesh as best I could and split it into multiple parts to print it. The fine details are a bit off from the original, but it is functional.
There are dowels that will need to be glued into place - although depending on your tolerances they may most friction fit into place - some sanding may be required for the axe-head dowels.
This model uses the linked M10 Nut and Screw Post, which was merged into the various pieces to allow for a sturdy screw-on design to easily take it apart for storage.