1 / 10
Raspberry Pi Articulating Camera Mount w/ No Glue, Clips Into the Unused DSI Slot — image 1
1 / 10

Raspberry Pi Articulating Camera Mount w/ No Glue, Clips Into the Unused DSI Slot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Supports Miuzei Raspberry Pi 3/4 cases, and supports Arducam 16MP IMX519 and Dorhea 5MP OV5647 cameras.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

These models are made to slide into the unused DSI port of your Miuzei Raspberry Pi cases, there are Pi3/4 cases are far as I know on Amazon. The stem has a ball-joint mechanism, allowing full articulation. Tilts 90 degrees through a drop notch, allowing you to point straight up. Tilts up to 48 degree. Pan is 360 degrees.

Required equipment:

  • raspberry pi 3/4

  • 8 M2.5 screws x 8mm (can also use 6mm and 12mm)

  • 1 M3 x 12mm screw and nut to tighten the ball-joint mechanism

  • 3D printer (I use Elegoo Neptune 3 Pro)

  • Camera: Arducam 16MP IMX519 or Dorhea 5MP OV5647 w/ IR sensor

  • screwdriver

You don't need every model file. Pick the file type that you prefer and only download those.

Tags