1 / 1
Flanges for cardboard spools (5.5 cm diam holes, Overture TPU spools) — image 1

Flanges for cardboard spools (5.5 cm diam holes, Overture TPU spools)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Center flanges for overture TPU cardboard spools to reduce rolling resistance (5.5 cm diam holes)

Rating
5 / 5
Likes
7
Downloads
40
Makes
1
Views
165
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

Center flanges for Overture TPU cardboard spools to reduce rolling resistance. I had issues with the friction between the cardboard and the spool holder. This increases the emptier the spool is, as this reduces the mechanical advantage the printer has.

The flanges fit spools with about 4 mm thick cardboard and 5.5 cm diameter holes.

Printed in PLA on speed profile (0.25 mm layer height + adaptive layers), but any hard plastic such as PETG should work fine too. The important part is that the friction is low, so stay away from matte / silk filaments.

The part snaps in place. You need one for each side of the spool.

Original CAD model is also public in OnShape: https://cad.onshape.com/documents/96a69bedb93683ab69598ca1/w/0120179bb408bda5c595b474/e/d36debcbfd5e6bd2d4cda933

Tags