Bebe Stool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A completely 3D printed stool with design elements inspired by IKEA's Mammut stools. Parts connect with M5 hardware.
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 69
- Makes
- 0
- Views
- 732
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Introduction
Meet Bebe, the 3D printable stool for all of your small furnishing needs! Bebe is designed with the following goals in mind:
- Be 100% 3D Printable on a 200x200x200mm build volume printer (compatible with printers such as Ender 3 or Ender 3 clones, Prusa Mk3 series printers, etc.)
- Use easy-to-find fasteners to assemble together
- Can withstand the rigours of use from a growing toddler (this is a test in progress, and future revisions are still to come)
There are 12 3D printable parts altogether, fastened together with M5 screws. Each “quadrant” of the stool has a seat, top leg, and bottom leg. Print each part with differently coloured filament to add fun accents to your playspace.
Additional Hardware Requirements
8 - M5 x 16 BHCS (Hex Preferred)
24 - M5 x 20 BHCS (Hex Preferred)
Recommended Print Settings
Tested with PLA and PETG.
At least 0.2mm layer height.
3 Perimeters for all parts.
5-10% infill for Seat, 30+% infill for Top Leg and Bottom Leg.
Supports for Seat and Bottom Leg, No Supports for Top Leg.
Assembly Instructions
- Assembly Time: 90 minutes
- NOTE: Use a high quality Allen wrench to assemble. Parts are self-tapped.
- Print all parts. Label each part with its corresponding number (parts with same number are fastened together.
- Assemble each Leg. Connect bottom piece of leg to top piece. Fasten together with M5x16 bolts.
- Assemble seat. Align four quadrants of seat together and fasten together with M5x20 bolts.
- Attach legs to seat. Attach one leg at a time. Allow for time to self tap threads.