Counting matching models…
A full-sized robust stool that can be disassembled into a small box so you can store it in a cabinet. For unexpected additional guest. Normal folding chairs always fold into a slightly less inconvenient and ugly shape. This design even…
Materiál: PLA Výška vrstvy: 0,2 mm Orientace: libovolná Podpora: žádná Výplň: 15 % trojůhelník
This is an adapter for attaching Festool 36mm hose to a “standard” 2 ½" dust collection port. I designed it for using Festool dust collector with D36 hose with my my table saw, router table, planer, jointer, bandsaw, etc. I was using…
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
This is my design for a modular multi purpose tool. It is: a stand for: a smarphone or a calculator; a laptop or tablet, if you print two ones and place them side by side; two hooks; a cable runner if you use only the Festool multihook…
Render preview: Here's a quick video demo: Assembly diagram for compressor setup Assembly diagram for vacuum pump setup BOM (with links) M3 x 10mm (x8) for attaching the top M3 x 22mm (x2) to attach the valve Male Thread Quick Release…
Both models are printed without supports. The models are connected with an M4 screw and nut.
skeleton Festool battery wall mount leyer hight 0.20mm infill 15%
Festool Sander base for custom Systainer inserts. Fits the ETS-125, RTS-400, and DTS-400, all of which have the same body. Created by scanning an original Systainer insert and then modeling around it with F360 forms and surfaces. The…
Festool conector to another festool table. Made it for conecting two festool table to make another one bigger, like modular table
Fancy Chair. For Personal Use only. For more models, characters, products or commercial license 👇 thangs.com/designer/ELEMENTO *Credit/mention to “elemento_artz” is required
Plastic containers Box for Systainer Organizer. The boxes are fuly compatible wiht the original containers and the gen3 Systaner System. Stack 2 on each other the hight is by 68mm. Printing The Modells are designt with following printing…
Witam! Przedstawiam podkładkę antyodpryskową do wyrzynarek firmy Festool. Podkładka zaprojektowana w taki sposób by poprawić widoczność linii cięcia, umożliwić dokładność cięcia oraz ułatwić demontaż. Drukujcie w 100% wypełnieniu.…
Cześć Festool-maniacy! Tym razem udostępniam Wam etykiety dla wyrzynarek marki Festool! Do wyboru macie etykiety dla skrzynek drugiej lub trzeciej generacji. Zalecam drukować w PETG/ABS ponieważ PLA w rozgrzanym samochodzie może się…
Witam! Prezentuję szeroką końcówkę odsysającą do odkurzacza marki Festool i innych z możliwością przytwierdzenia do dowolnej powierzchni. Pozdrawiam!
Witam! Prezentuję ściankę do systainera SYS3 S 76 marki Tanos / Festool umożliwiającą uzyskanie 3 osobnych przegród w systainerze. Pozdrawiam!
Witam! Prezentuję uchwyt na baterię 18V marki Festool z kanałem powietrznym AIRSTREAM. Pozdrawiam!
A stool for a dollshouse or architectural model. Re-size to suit your application.
Cheap microscope arms like this come with a 40mm ring. This adapter enables microscopes like the Mustool G1200D to fit in the holder. The 40mm ring i got is 40.1 mm so I made the adapter 0.5mm wider for a snug fit so it technically is a…
I was in need of a stool to sit on when wearing my shoes. So I designed this bad boy. I used 3 walls and %15 infill and it is very solid. You can use more walls or infills of course.
You will need two m5 screws ~12-16mm long to attach it. Print in PETG and with as many walls to make the narrow part solid. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without…
Best printed with PETG, no support. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without permission. Please consider canceling your Prime subscription and support non US buisnesses.
Best printed with PETG, no support. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without permission. Please consider canceling your Prime subscription and support non US buisnesses.
Best printed with PETG, no support. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without permission. Please consider canceling your Prime subscription and support non US buisnesses.
Print-in-place stool . Available in two sizes . 55cm and 37cm . The stools are designed so that you only need support for the small stool, which I've already added manually. 0.4 nozzle 4 walls 0.16 or 0.2 layer height 15% infill gyroid 4…
Small, quick-to-draw but functional button. I put 3 walls.
Labels to put on systainers - they match the original size
Ayant un cyclone Festool CT-VA-20 sur le dessus de mon aspirateur CTL, je cherchai une place pour ranger les accessoires de l'aspirateur, c'est-à-dire : la poignée les 3 tubes le balai de sol le suceur fin la brosse Le but est d'avoir…
Bring a touch of classic design and refined comfort to your miniature scenes with this 3D printable STL model of the Martine Tufted Leather Stool. This elegant furniture replica is perfect for enhancing dollhouses, dioramas, or any…
Add a touch of rustic charm and comfortable seating to your miniature scenes with this 3D printable STL model of the Oviedo Leather Stool. This stylish furniture accent is perfect for enhancing dollhouses, dioramas, or any interior…
There are several models out there which allow you to add the Gridfinity system to your Mini Systainer. Besides simple grid models, some guys designed some interesting models that use the available space more effectively, for example,…
I was missing a "limiter" 4 the angle stop of my Festool tks 80 EBS. It is quite annoying to do repeatable cuts without it. New versions online. Check em out yourself :P In addition to the printed parts you will need M5 x 20 (25?) Screw +…
I finally created a systainer rail for my older Festool systainers that have been stacked up on the garage floor for too long. They work great and of course they are way cheaper than buying the Festool brand rails. I used all of my old…
Dimensions 215x215x170. Print without supports. Holds 100 kg (barely). And yea it is definitely overcomplicated.
End stop for Festool track saw tracks and compatible tracks. This can be used to make cuts of a defined length and position. It can also be used with a router. A use examples with a router is in the photos. To be able to make a Festool…
NOTICES: Non-commercial, free-of-charge provision of a single construction file in STL-format. This is a simple Guide Rail Stop for use with the support unit and swivel unit, respectively, of a Festool MFT/3 Rail Guide. The MFT/3 comes…
adapts the threaded eksand port to a 36mm festool hose works with surfprep 3x4 sander too
I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…
New vacuum hose deflector for Festool guide rails. The lateral flanges prevent the hose from getting entangled. Additionally there's a version without flanges, simply to protect the aluminum rail. Easy to print. No tools required. Fits on…
Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance. With this jig you can: Use generic or bulk sandpaper with Festool STF D125 (125mm) sanders Punch the correct hole pattern into…
This gridfinity base fits the Systainer SYS3 3 drawer set. Allows for better customisation than the systainer dividers and boxes. I print in ABS as I use and abuse them and they hold up well. PLA and PETG would also work. If your…
Always wanted so foam inlay for these for various uses, but I think something like this makes more sense for me right now. Will add some other versions soon as well. Printed it on the bottom, Really most settings should work, as should…
Short connecting link for Festool vacuum hoses (ID 35mm).
Space-saving ceiling or wall mount for Festool Cleantec hoses.
Want to Support me? Post a Make Give it a Like PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- About: Use this lock to keep the step stool from folding when lifting or handling it. One lock is…
Design Concept This 3D print model features a cute and friendly kawaii-style mushroom toadstool. The character design with a smiling face and bright colors gives it a charming and inviting appearance. Cute chibi mushroom for 3D printing.…
Screws needen: Main Housing: 2x M4x12 socket head screw Round Head: 3x M4x16 socket head screw Flat Head: 3x M4x12 countersunk screw
Doporučení k tisku: PETG/PLA, 3 perimetry, 15-20% výplň. Při tisku užším koncem na podložce stačí podpěry pouze pro vnitřní malé konektory. Printing recommendations: PETG/PLA, 3 perimeters, 15-20% infill. When printing with the narrow end…
This Cute Mushroom Forest Sprite brings charm and whimsy to your fantasy collection. With its oversized spotted toadstool cap, tiny rounded body, and simple expressive face, this chibi-style woodland character is perfect for collectors…
Work either as a connector between two rail guides to extend, or as a fixture onto something else such as in a jig. Printed in PLA-CF for stiffness and toughness. Holes diameter is for M4 screws.
This diner and bar are meant to represent familiar places that feel comfortable and easy to return to. My aim was to keep the design simple and easy to print while still capturing the quiet, late-night setting inspired by Edward Hopper's…
🍄 Toadstool Cottage – Whimsical Fantasy Miniature for 3D Printing Step into a storybook world with the Toadstool Cottage , a charming and magical little home straight out of a fairy tale. Supports are needed. I used organic-style…
Bit-Inlay für den Mini Systainer (SYS3 XXS 33) von Festool Dieser kann u.a. unter https://www.festool.de/produkte/fanartikel/fanartikel-buero/205398---sys3-xxs-33-gry erworben werden. Abmessungen: 93 x 58 x 10 mm (Griff 10mm) Für 34 kurze…
Festool Bit cassette holder - simplify your tool management Where do you currently store your bit cassettes? Print your own Festool Bit cassette holder and make your everyday work easier and more productive. Don't have a Bit set yet?…
For those who don't want to pay over $100USD for a brace that should be included with the table, here is an alternative. You will need fasteners and two pieces of 1/2 inch x 23 1/2 inches long metal electrical conduit, and you have the…
16.1mm diameter bar legs. Raises the bottom of the stool up to bumper height of your Roomba. Requires a 9/16 hole to be drilled into the base, so it doesn't move or rotate. I added some epoxy as well, just as a bonus. You can break off…
I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program! I recommend PETG…
A more space-efficient twin-hose Y adapter for Festool dust extractors with hoses facing to the front. Can take the Festool slide blast gates and after-market 2.25" / 63 mm options as well. Print with the twin hoses down on the print bed,…
Festool vacuum to Milwaukee clip adapter. For connecting Festool Vacuum to Milwaukee Tracksaw, Router, Planer etc. Festool side uses the OD of the standard 27mm hose and has locking barbs. Milwaukee side uses the OD of their stupid clip…
When the replacement feet for my local Pubs barstools became unavailable from the manufacturer, I designed these cushioned but durable replacements. The TPUs properties truly shine in this application. These pads were designed for…
Printing: Model has integrated, easily removable supports. I reccomend printing from PLA which holds very well after many cuts. I also tested PETG but it broke quite fast. Happy printing and cutting!
Simpler Spannzangenschlüssel für Shaper Origin oder Festool. Gedruckt mit 3 Außenwänden und 10% Infill in PLA Englisch Version: Simple collet wrench for Shaper Origin or Festool. Printed with 3 perimeter walls and 10% infill in PLA.
This is a copy ring for Festool OF 1400 router. Thanks to ChowS on Makerworld for making the initial model. I remixed it so that you can print your own inserts. The accuracy and robustness of a 3D printed model will not be sufficient for…
Just a replacement foot to suit a 91cm stool from kmart. This one: https://www.kmart.com.au/product/91cm-bar-stool-tan-43332687/ I printed it in PLA and it worked fine for a couple of years. Just broke recently, I'll probably use ABS next…
Hey, der Ansaugstutzen von meiner FESTOOL Tauchsäge war sehr locker und der schlauch vom Staubsauger hielt nicht mehr perfekt somit hab ich dies erneuert und es klappt perfekt gedruckt mit 100% ist es perfekt. hab spass beim drucken Hey,…
This adapter can be used to connect a Festool DF500 or other similar tools to a Ridgid (or similar) 1 1/4in dust hose. The dust hose is a tight friction fit and the Festool connector uses a tabbed twist lock. It's a secure fit to ensure…
Hi hi, wonderful people! If there's anything more magical than toadstools it's toadstools with secret compartments! Okay, not that secret - the entire cap is attached with a magnetic twist-lock mechanism and can be removed to reveal a…
Handschleifer mit Staubabsaugadapter Für Schlauch Innen-Ø 25-mm Außen-Ø 33-mm Anschluss für Festool Anschlussmuffe oder mit angepassten superschnellen Schnellwechselsystem für Staubsaugeranschlüsse mit 2x 10x2 Magnete von Peter H +…
This tray is the companion piece to my Festool Domino Dry Fits models . It is engineered specifically for those dimensions, but should work equally well with other dry fit prints - or any tenon-shaped part you want to store upright. These…
Remix of the Handle and adapter by Thyn. Combined the models and resized them to fit a standard 32mm vacuum cleaner pipe. Should be compatible with most Festool CTL/Cleantec vacuums and standard 32mm vacuum cleaner pipes Fits perfectly…
Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…
Danke an Steve Rowe für das Model. Habe bei dem Spül-adapter-Titebond-Verschluss das innen Gewinde in 3/4-Zoll-Gewinde geändert für ein Gardena Schlauchstück 3/4" (0917-20) Flachdichtung ¾" 17/24/1,5mm jetzt kann ich auch mit Warmwasser…
Vielen Dank an argoroots für die Vorlage. Ich habe sie verwendet, um 4 Einsätze für den Systainer 3 M112 zu erstellen. ________________________________________________________________________ Thanks to argoroots for the template. I used…
Labels for Festool Systainer 3 M112 Domino Dowels
Simple foot/cover for stool leg 19mm inner diameter, model in photo printed in PETG but TPU may be more suitable.
Parametric Drum Throne Stool or Cymbal Stand TPU Foot If you're a drummer, you know that you are always losing or cracking the feet on the bottom of your drum throne and cymbal stands. This mildly parametric model (you'll have to mess…
Vandisphoto's design on thingiverse works fine as it is, but I wanted some markings for easier measurement, + the little "L" sticking up on the top just irritated me. Hardware needed: 2x 8mm rods (the ones that come with the router, or…
A cute miniature stool with a seat shaped like a button. More models here → https://cults3d.com/ja/yuza/ichigodaifuku/3d-moderu This playful design turns a simple stool into a charming decorative piece. The button-shaped seat gives it a…
Our son is growing up so much that it was time to make him a taller stool. This stool is much sturdier than the first version. No tools or glue are needed, it's just a puzzle that your child can put together themselves. Unfortunately, I…
I use some white oil to color the maple wooden part. The part with the names “Gabarit_..” are used to allign the holes in the seat. The parts with the name “gab…” are use to help cutting the wooden dowel at angle. I used a wood spinning…
a holder for the old Festool Systainer, I used double sided tape, I drilled two holes through the top holes and fixed it from the inside with a thumbscrew Please don't forget to “Like” the model. / Bitte vergiss nicht das Modell zu “Liken”.
Crevice tool I made for my Festool Vacuum… lugs lock head into place with the normal twist action. Recommend printing in a hard flexible such as 95A TPU for an extremely tough part that will stand up to abuse and also not scratch/damage…
Here my Guide Rail Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Guide Rail ;) Update 13/01/2022 -add stronger plate to the bottom part -add a pair of…
Here my Spirit Level Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Spirit Level ;) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
This end piece clips easily on Festool saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports. Update 20230623: Small modification on the splinter guard side (removed…
Ein Ersatzteil für die Festool Oberfräsen aber auch für jede andere Oberfräse. Benötigt wird eine M6 x 10 Sechskantschraube. Beide Seiten werden mit UHU Allplast verklebt. Siehe Bilder A spare part for the Festool routers but also for any…
Please be aware that the 50 mm pipe has a slightly conical shape from 49.9 to 50.1 mm to make sure that it fits and is airtight. There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s approx. 4 h. If you…
There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s < 3.5 h If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…
Update 18.03.2024: Added custom versions of the model with left and right nuts, allowing printing with minimal support. Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand: Flying Bear Printer:…
Inspired by the original Festool jig. Unfortunately, the tool is not available for the Festo OF 1000, so I redesigned it. If the cap is difficult to turn, a drop of oil helps. Inspiriert von der originalen Festool-Vorrichtung. Leider ist…
Labels to fit the drawers of Festool Sortainers. Verified to fit Sys 3-Sort 4 and should fit the drawers of any of the other Sys 3 Sortainers. The .f3d file allows you to easily change the text in Fusion 360. Simply open, edit sketch,…
I design this pads to fit differrent brand of MFT / T slot clamp and to be printed without supports. It works on Festool, Veiko or no name from bangood The rectangular protective pads is inspired from the festool orginal pads The other…
Includes design file to alter for your own bench heights if needed. Secure to either side below the counter top and enjoy. I chose 25% infill with a gyroid pattern on PLA.
I was always annoyed when my painting cones or pyramids moved away on the workbench when oiling or even polishing wooden boards … So I just thought about having a painters cone which uses my workbench dog holes, or which I can also screw…
