Dust Port Adapter - Sawstop Table Saw to 50mm Festool Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Off the shelf dust port adapters stick out too far, especially for Sawstop PCS/ICS Table Saws with mobile bases
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 86
- Makes
- 1
- Views
- 1,675
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Background
I use an old Festool CT-22 vacuum + Oneida Dust Deputy cyclone separator with my Sawstop PCS and it works well! This lets me avoid having to buy a bulky dust collector and route 4" duct work around my small workshop. I'm sure the newer CT-26/36/48 dust extractors would work even better.
Description
Dust Port Adapter for Sawstop Cabinet Table Saw 3-7/8" to Festool 50mm (452896) Anti-Static Hose. Both ends of the adapter are tapered for tight fits; see the cross-section animation below for revolve profile and dimensions. Furthermore, on the 4" (nominal) side, there are reliefs cut every 90° and a small pocket that allows for a hose clamp to tightly clinch around the Sawstop dust port.

Settings
Prints much faster if larger nozzle size is used! Print time is 1 hr 45 min with 100% infill, a 1.0mm nozzle, and variable layer height. I used PETG.
Rules
- Please abide by the license and do not print these for commercial use.
- Please do not sell these for profit.
- Please leave a tip if you find it useful.
- Please reach out to me if you'd like me to print one for you.