1 / 7
Rubber band gun / launcher that actually works — image 1
1 / 7

Rubber band gun / launcher that actually works

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Rubber band gun for up to four bands. Tool-free assembly (rivet-free version) or with filament-pieces as rivets.

Rating
0 / 5
Likes
5
Downloads
20
Makes
0
Views
148
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Rubber Band Gun / Launcher toy that actually works!

Easy-to-print, reliable rubber band launcher, can load up to 4 rubber bands. Great toy! Two versions: with rivets (small filament pieces are used as rivets, looks pretty) and without rivets. Rivet-free version assembles without tools.

Advantages:

  • Cool toy :D

  • nicely small

  • Fits four rubber bands

  • super easy to print

  • launches rubber band at trigger pull (not trigger release like some other models)

  • very reliable

  • Kids-friendly, easy reloading

Printing:

All five pieces should be printed with 0.2mm layer height and without brim. The tip of the gun has a brim included by itself (0.2mm thick circle) to prevent the horns from lifting up. That brim can be removed easily at the end.

There are two versions: With and without rivets. Both versions are assembled in the same way, see pictures. The toothed wheel and the trigger are a slide fit on their pegs (if not: some sand paper helps) and the studs/holes to attach the lid are a push fit.

Assembly: See pictures.

Rivet-Version:

To make a rivet, take a piece of filament, heat the tip with a lighter and squeeze it against an edge to create the rivet head. Cut the rivet off at a half inch. Heat the other end and squeeze it round with your fingers to create a narrow tip that fits through the hole. Push rivet through hole, cut it off and leave 1/16'' poking out. Carefully reheat tip with lighter and squeeze flat with a screwdriver.

Tags