TPU Cable Grommet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple TPU Cable Grommet for a passing a power cable through a panel.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Open Community License v1.1 + General Attribution v1
I needed a quick panel grommet for a IKEA Fornuftig cable I am passing through an ABS panel. The goal was to get a snug fit without compressing the power cable.
This split grommet fits a 12-13mm hole (as wide as the power connector on the IKEA Fornuftig air filter), and presses snugly through a 3-4mm ABS panel. The cable is 5mm thick, so the 5.5mm pass through should provide a little wiggle room without being a large pass through for anything else to get in or out.
Print in TPU, with no more than 2 shells and minimal infill to keep the thing flexible.