Prusa Core One dust protector (remix) for 6x1 mm magnets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.50 – €0.61 net (excluding VAT)
For file: dust-cover_6x1-dustcoverbackleft_0.4n_0.2mm_PETG_COREONE_11.4281g_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.55 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 23.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remixed to fit 6x1 mm magnets
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 1
- Views
- 172
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a modification to accommodate the 6 × 1 mm magnets I already had on hand.
The included G-code is configured for PETG and uses custom 0.4 mm mouse ears to help reduce warping. It has been tested and is printable on the Core One, but results may vary depending on your printer and settings.
Superglue is required for assembly.