1 / 2
Prusa Core One dust protector (remix) for 6x1 mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to fit 6x1 mm magnets
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 171
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a modification to accommodate the 6 × 1 mm magnets I already had on hand.
The included G-code is configured for PETG and uses custom 0.4 mm mouse ears to help reduce warping. It has been tested and is printable on the Core One, but results may vary depending on your printer and settings.
Superglue is required for assembly.