Pencil Fidgit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fun fidget spinning toy that goes onto your pencil to keep you entertained and happy.
- Rating
- 3.5 / 5
- Likes
- 396
- Downloads
- 793
- Makes
- 0
- Views
- 8,736
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This a fun spinner that can be 3d printed and attached to a pencil to play around with when bored in class or work or just need something to keep you focused or distracted on anything. this design is just as easy to assemble and print as it is to have fun with it. Push to spin it or move the side gears up and down to move the whole thing up and down.
All The Parts:
How to assemble:
Step 1:
First take the bottom encasement and put the 2 side gears in the rods where they are ment to go.
Step 2:
Then put the top encasement on using the extruded pins on the side of the encasement to connect with the holes of the bottom encasement.
Step 3:
After that slide the Center Gear with the thread in it in between the top and bottom encasement and make the holes line up.
Step 4:
Screw the middle worm gear through the holes on the encasement and through the center gear.
Step 5:
Finally screw the cap onto the worm gear.
If any of the outside gears are tight on the rod you can sand the insides down a little bit which should smooth it out or put some lubricant on the center gear to make the up and down mechanism smoother.
And there you have it put it on a pencil and its good to go! :)