Benchy Pool Chemical Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Benchy shaped pool chemical floater.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 47
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Summer
- License
- Creative Commons — Attribution — Noncommercial
Benchy Pool Chemical Dispenser
Turn the classic Benchy into a functional pool accessory!
This Benchy shaped pool floater features a screw on basket for pool chemical tablets, allowing chlorine and other pool chemicals to be gradually released into the water while the Benchy floats on the surface.
The standard version is designed for small pool chemical tablets from 2.5 cm (1 inch) up to 3 cm in diameter.
The basket can be easily screwed on and removed, making it simple to insert or replace the chemical tablets.
Print Settings:
Layer height: 0.2 mm
Walls: 3–4
Infill: 8–15%
Supports: required for the Benchy
Support Structure: Touching Buildplate
Support Overhang Angle: 80°
Or Overhang Threshold: 5°
Only the threaded part requires supports.
Recommended Filament
For better resistance to chlorine and prolonged exposure to pool water, ASA or PP are recommended over PLA.
Recommended: ASA
Alternative: PP
Not recommended: PLA
Note: Pool chemicals are corrosive. Filament resistance can vary depending on the specific material, concentration, temperature and exposure time.