Counting matching models…
This 3D-printed top floater is a replacement for the Eheim Skim 350’s original floating intake, designed to enhance water surface skimming while preventing fish from being drawn into the intake. The slimmer slits allow effective water…
The filament used must be able to withstand more than 100°C ! You also need 3 pieces of 6.0mm x 3.0 mm magnets (I have used "Wukong 6 x 3 mm Neodym Magnets"), which are then pressed into the holder.
Floaters inside Senseo machines sometimes starts to leak and stop floating, resulting in the machine not detecting when there is enough water in the tank. This replacement should resolve that issue. This floater should fit in the HD786*,…
Xiaomi (Mija) Smart FishTank MYG100 Alien Weed FLOATER Grower perfectly organize floating weed right under the lights. Also it protects roots from being broked by waterfall because it keeps weed off the rollercoaster ) As you see weed…
Hi hier habe ich für den Pool ein einfachen Chlor Behälter mit Fusion360 gezeichnet. Lässt sich mit dem Prusa MK3s ganz ohne Support drucken. Ich habe eine Version mit 0.15 Layerhöhe gedruckt da passt der Deckel ganz gut. Falls ihr mit…
10/15/24 v2 Update Holes on top and bottom increases by .2mm (to 4.2mm and 8.2mm) The 4mm and 8mm holes were too snug, especially when removing the wing from the decoy. I broke a printed mount as it was a little snug when taking it of the…
A small replacement part to fix a Jung pump floater in place (Schwimmerfixierung). Tested with the Jung U5 KS pump. Printed with small support towers on both openings, 20% grid infill, three perimeters, and three bottom and top layers.
floater for hydroponics or other applications with centigrade scale - 20/25cm - diameter 0.8 cm and bottom 2.0 cm. Best to print with brim, infill 5 %. The floater column has indication of cm on column.
This 3D-printed top floater is a replacement for the Eheim Skim 350’s original floating intake, designed to enhance water surface skimming while preventing fish from being drawn into the intake. The slimmer slits allow effective water…
Made these mounting brackets to mount my ~½ canvas inside a 1.5" floating frame. Hold your canvas where ever you need it and helps keep the frame square. If you like my models please follow me on insta @shorcodesign
A Candlefloater suitable for Candles with a diameter of 39mm. Ideal for bathtubs or pools.
Minimalist planter design made of several torus with variable diameter. It is sized for the A1 mini. Inner diameter of full scale model (olive green in the photos) is 120mm, which together with height of 118mm gives you around 1.3L of…
Minimalist planter design made of several torus with variable diameter. Fits to the A1 mini. Inner diameter of full scale model is 104mm and height inside around 80mm - this gives approx. 0,7L volume. By scaling it down to 85% you can get…
Minimalist snack bowl design made of several torus with variable diameter. You can easily separate the shells from the snacks and it can hold around 250g of pistachios. Equipped with grooves for easy alignment. There is also a planter pot…
A simple fillable bobber/floater, with a screw-on top. Compatible with my 'Compact Hobo Reel'
Easy to print and open. Fitting to JAR glass. You don't have to worry about water :)
The filament used must be able to withstand more than 100°C ! You also need 3 pieces of 6.0mm x 3.0 mm magnets (I have used "Wukong 6 x 3 mm Neodym Magnets"), which are then pressed into the holder.
Remixed the hook for 42mm tubes Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Category: Outdoor & Garden
🔩 Improved Lid for Intex 29041 Floating Dispenser 💦 Did the original lid break or go missing? Here’s your fix! 🛠 I designed this replacement for the Intex 29041 chlorine floater after the clips on the original wore out – this one's been…
The cap of my floater got crunchy over the years, so I created a new one, which also has a hole for my thermometer, which kept tip over all the time. I printed PLA with 40% infill, but I don't expect it to last long. It was more a first…
I printed this with the same settings as my avocado floater - clearly not optimal. I used a 0.6mm nozzle and a 0.36mm layer height with E3d Spoolworks Edge. Dimensions and settings are unlikely to be very critical. Print is fast, took me…
Hey! I was using this model made by Mikolas Zuza , but it sadly did not fit any of my jars - it was just a little too big. Instead of scaling it down I used it as a designing excercise to make essentially the same model, except that it is…
Floaters inside Senseo machines sometimes starts to leak and stop floating, resulting in the machine not detecting when there is enough water in the tank. This replacement should resolve that issue. This floater should fit in the HD786*,…
Original design was not strong enough because I didn't print it 100% infill as recommended, but also the geometry is less shear resistant than a "grip" with more perimeter (e.g. square or hexagon). My drums had been left untouched for…
Xiaomi (Mija) Smart FishTank MYG100 Alien Weed FLOATER Grower perfectly organize floating weed right under the lights. Also it protects roots from being broked by waterfall because it keeps weed off the rollercoaster ) As you see weed…
Turtle Pool Chlorine Floater 🐢 A fun and practical floating chlorine dispenser for pools, designed in the shape of a turtle. The lower compartment is designed to hold up to 3 chlorine tablets (20g each) . Once placed in the water, the…
Experience the elegance of sculptural artistry with this stunning 3D printable STL model that brings classical beauty to your desktop. This graceful female figure statue showcases flowing curves and dynamic posing, making it an…
Update 4: Added ddifferent versions of grid spacing Update 3: Modification for skimmer 212x204mm based on request Update 2: Optimized overall dimensions to fit MK3 printer Update 1: Optimized wall thickness to 1,2mm and added 1,6mm…
A ceiling mounted shelf set, print 2 plates and four arms. Have holes to mount to ceiling and use fasteners to attach arms and bottom shelf. Quick easy print using to hold modem from ceiling. Category: Electronics
This is a remix of @ulitiy's nice floater for the ultrasonic mist maker: https://www.thingiverse.com/thing:3900020 This thing floats on packaging foam, rather than on infill air pockets that are rather difficult to print watertight.…
Result of office Avocado seed floater challenge. Printed in ONE piece. Mechanical lock. It is easy to open when the roots come out. Before use, you cut out the 1 layer brim between the lock.
AXN Floater Jet motor mount Uses the 16 x 19 mm motor mount to make changing the motor easier. increases the motor height for larger propellers. Print Settings Printer: Tronxy D01 Rafts: No Supports: No Resolution: 150 Infill: 30…
A floater to put in your saltbox (brine tank) this floats on top of the salt and by this meauring the amount of salt left, when passing the door sensor on the outside of the saltbox it sends a message (using home assistant and telegram)…
This is a schwimming pool chlorine floater/dispenser for those big 200g pills. The print has two parts. No support needed. I used ABS and PETG, but Josef Prusa recommends ASA (better UV & chlorine resistance). 20230525: Uploaded V3 -…
This floating mount for the Aqara water leak sensor can be used to monitor the water level in a tank. By attaching the mount to the sensor, it becomes a convenient tool for determining if the tank is full or almost empty. The mount is…
Avocado seed floater https://www.printables.com/model/627-avocado-seed-floater/comments
A very simple vase for the Avocado Floater . PETG is probably recommended because it'd hold the water better. However, I used PLA with a Bambu Labs P1P default settings and it is holding water strongly for the moment. Time will tell.
Tired of buying expensive chlorine floaters, and little tablets. So I made this to hold 3" tablets. They last about a month in my small 3 person spa. Used PETG @ .20mm. The small 1mm hole I determined was just enough to keep the chlorine…
This GoPro accessory can be used as a handle for your camera. It will also make your GoPro float. This is perfect for in and under water. Instructions I printed it with 100% fill. The floater is hollow inside wall thickness 3mm. No…
Simple swimming pool chlorine floater holder for round bottom floaters with a diameter of 10 cm (e.g. Intex). The floater body diameter can be up to 19 cm. Can be printed on the side as shown in the picture. I added support for the base…
I needed to add this smart monitor to a fish pond that i have, I remixed this drink floater to do this, the design was just perfect for my use. You can add as mush pontoons as you like and even arrange them as you like. I got the sensor…
I added a PrintABlok Connector to the floater because the PETG parts were very difficult to glue together. So there is no need to glue the parts. Just put them together.
Hello and welcome, this model is designed to float on water and to provide optimal water delivery for up to 4 ultrasonic foggers (16/20mm ceramic piezeo). This can be used in a fogponic setup to grow e.g. different types of lettuce.…
Tank floater for water collector Must have 11.5 x 1.5mm aluminium profile 16 x 2 mm aluminum profile 4x M6 bolts Water bottle
If your floaters get stuck on your skimmer, give this a try. Doesn't use much filament (recommend PETG for flexibility vs PLA). I could have increased the circulation/swirl speed to push them along by adjusting the discharge nozzle, but…
It is good idea and works great, thanks to author. I had issues with printing the thin walls with my 0,6 nozzle so I was remixed it.
The pool floater from @tstoegi_22008 is nice but I've a small pool and needed to limit the flow through the floater so I've simply added a ring which closes the holes. Printed with 0.3 layers and seam-aligned makes it “snappy”. See the…
Printed at 20% infill and with support material. I used PLA but will probably print in PETG next
No more toothpicks and refilling the water every day! With this floating grower, the avocado seed will stay submerged evenly for weeks! As the water evaporates, the floater will simply go down with the water level. Once the avocado is…
For use with floater: Amazon Uses M3x6mm / M3x20mm hex bolts. The fogger has an optimal distance below the water that it works, this floating platform keeps it at that level no matter what the water level is at. Fogponics is an advanced…
How to use: Twist af top of the pineapple. Remove the first 3-4 layers of leafs. let the top rest for 1-2 days. Place the top in the floater and wait for few weeks to grow roots. When roots grow a few centimetres place top in a pot and…
Openable Avocado Seed Floater by @DominikCisar, with the unnecessary bottom "support" layer removed.
From this project : https://www.printables.com/it/model/57885-self-watering-rectangular-planter-with-optional-la/remixes I modify the floater and desing a cap.
The mounting pins on our dispenser lid broke off and given the replacement cost for the whole assembly of CHF 30.-, I decided to quickly design a replacement lid. In the current version, supports are inevitable due to the protruding…
Hi hier habe ich für den Pool ein einfachen Chlor Behälter mit Fusion360 gezeichnet. Lässt sich mit dem Prusa MK3s ganz ohne Support drucken. Ich habe eine Version mit 0.15 Layerhöhe gedruckt da passt der Deckel ganz gut. Falls ihr mit…
I took inspiration from the original and added more stable floating parts. The original has a tendency to tip over when water is added. The new version floats much more stable. The center blade is pretty much original. No extra weight…
When these designs inevitably break, this clip restores functionality . It also provides an elegant solution to picking up the float out of a cup. https://www.printables.com/model/715424-openable-avocado-seed-floater-no-bottom-s…
If printing as a fish floater, print at the least amount of infill possible to help float. For decoration, recommended 10-15% infill gyroid. Should be minimal supports if any (printer is currently down). Post makes so I can see them! This…
I used PLA, 0,4mm nozzle, 10% infill and 0,2mm layer. NO SUPPORTS needed. I scaled both of the parts down to 40-50%.
Prevent floater from entering nano skimmer. Fit 5mm glass. Added foam to help with buoyancy (see picture). UPDATE 28/04/2024 V2. Made it a little bigger to help with buoyancy. Rounded corner.
This is a floater for rain barrels. It is supposed to be filled with sand to increase its weight. The top can be connected with a string to the hatch of the pipe of the rain gutter. Once the water level of the rain barrel sinks to a…
Simple floater, that you insert into tank with drink water for small animals. Thanks to that you easily see the water level. Was developed because my rabbit drink tank (made from polypropylene) has opaque walls and it is difficult to see…
The holder is composed of three main parts, the camera holder, the handle and the end cap. The camera holder and the end cap screw on the handle. There are two rubber O-rings commonly used on plumbing with 27mm OD as per picture that seal…
Small floater for fishing bait Recommended PLA - No more than 5% infill to ensure it floats
Use 1mm steel wire. #2 to #4 hooks 100% infill the the first 5mm then 15% to keep it upright.
