GOPRO / ACTION CAMERA FLOATER
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.10 – €1.35 net (excluding VAT)
For file: bottom cap _0.4n_0.2mm_PETG_MK4ISMMU3_1h1m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.22 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.02 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This holder is composed of a flaoter with screwed camera holder and end cap.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 65
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
The holder is composed of three main parts, the camera holder, the handle and the end cap.
The camera holder and the end cap screw on the handle.
There are two rubber O-rings commonly used on plumbing with 27mm OD as per picture that seal the hadle void space, also as option to reinforce the water tightness, designed two 3D printable TPU whashers. The void space will ensure the camera will float, have neutral buoyancy or sink depdening of how much water is put inside handle.
The handle has a knurled texture to reinforce the grip.
The camera holder, handle and end cap are printed in PTEG with 15% infil.
Supports are used as per pictures to ensure good finishing.
The two optional whashers are printd o TPU using 100% infill.
The end cap has a hole to install an opotional holding strap.
The camera holder uses a threaded insert type M5x9.5x7 compatible with GORPO camera thumbscrew.