LED Downlight Hood for Honeycomb Aeronautical
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hood to mount generic LED strip to light up flight stick and throttle buttons.
- Rating
- 4 / 5
- Likes
- 15
- Downloads
- 108
- Makes
- 1
- Views
- 1,040
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hood to mount most LEDs strips. The channel angled with a slight lip to prevent direct light shining outwards. Allows you to route between the Alpha on the left to the Bravo to the right. Included the one piece hoods and the 4 piece hoods for smaller beds.
Myself, I printed the 4 piece hoods with the sides flat on the bed. You can print out alignment pegs, 0.5" lenght by 0.25" diameter, or use magnets, sized for this https://www.magnetsource.com/collections/ceramic-disc-l2/products/cd002503-s . You may be able to print it one piece by placing the back of the model on the bed as it's flat.
Modeled in Onshape from plans provided on Honeycomb Aeronautical's website.