1 / 2
Ubiquiti UniFi PoE++ Injector Structured Media Enclosure Mounting Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket for the Ubiquiti UniFi PoE++ injector for structured media enclosures.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mounting bracket designed to attach a UniFi PoE++ Adapter (60W) (U-PoE++) or a 10G PoE++ Adapter (60W) (UACC-PoE++-10G) to a structured media enclosure. The mounting system is the same as the one that comes with the PoE++ injector, so you can remove the original one and attach this one instead.
I printed it using Buddy3D PETG with 25% infill and organic supports on the overhangs, and it turned out well. I also used these push lock pins to attach it to the structured media enclosure. Works pretty well with this!
