1 / 2
Ubiquiti UniFi PoE++ Injector Structured Media Enclosure Mounting Bracket — zdjęcie 1
1 / 2

Ubiquiti UniFi PoE++ Injector Structured Media Enclosure Mounting Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting bracket for the Ubiquiti UniFi PoE++ injector for structured media enclosures.

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mounting bracket designed to attach a UniFi PoE++ Adapter (60W) (U-PoE++) or a 10G PoE++ Adapter (60W) (UACC-PoE++-10G) to a structured media enclosure. The mounting system is the same as the one that comes with the PoE++ injector, so you can remove the original one and attach this one instead.

I printed it using Buddy3D PETG with 25% infill and organic supports on the overhangs, and it turned out well. I also used these push lock pins to attach it to the structured media enclosure. Works pretty well with this!

Tagi