Pokémon Snap-In Tin Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-in TCG Card Insert for Pokémon Tin Box
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Use this insert to turn your Pokémon TCG tin into a practical card storage box. The insert is designed as snap-in part that fits securely inside the tin without moving around. It is also optimized to use as little filament as possible.
Print the insert without any infill using a layer height of 0,20 or 0,25 mm. Both PLA and PETG should work well. When printed without infill, the walls remain slightly flexible, allowing them to bend inward while the insert is being fitted into the tin.
Two versions are available:
One for unsleeved cards
One for cards in 66 × 93 mm sleeves
Please leave a comment if you have any suggestions or ideas for improvements!