Speedometer housing for Campers and Cars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a housing for a GPS driven Speedometer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Open Community License v1.1
Housing for a Speedometer based on CYD (Cheap Yellow Display) with GPS and light sensor.
The code (Arduino) and further description can be found on GitHub:
https://github.com/Martinus117/Speedometer_CYD
I prented the housing with PC Blend to give it a better temperature stability (it can get really hot in cars under the windshield).
PC Blend is a bit difficult to print, so you might need to experience. I think PETG also works.
I used 0.2mm layer height with no support. The small GPS Holder should be printed face down.
The lid is prepared for heat-set threaded inserts M3, h=6mm