1 / 4

Customizable IKEA SKÅDIS Universal Hook Generator (adjustable size and tip angle)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3icad

@3icad_2273628

Parametric IKEA SKÅDIS hook generator. Adjust reach, tip angle, and support arc strength to fit any tool or cable.

Rating: 0 / 5
Likes: 9
Downloads: 55
Makes: 0
Views: 434
Reviews: 0

Updated at source: Oct 11, 2026

Model information

Source: Printables
Category: Other House Equipment
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Files (6)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (24)

Fully Parametric IKEA SKÅDIS Hook Generator

A fully customizable hook system engineered for the IKEA SKÅDIS pegboard system. Whether you need a low-profile cable hanger, an angled tool hook, or a reinforced heavy-duty bracket, this parametric model allows you to tailor every dimension to your exact requirements.

This upload includes ready-to-print pre-generated STL hooks as well as the Fusion 360 parametric file (.f3d).

📦 What’s Included?

Pre-Generated STLs: Ready-to-print files featuring standard utility hook sizes.
Parametric Generator: Open the .f3d file in Fusion 360 to tweak lengths, angles, and structural supports for custom items.

🛠 How to Customize (Fusion 360)

Open the .f3d file in Fusion 360, navigate to Modify > Change Parameters, and adjust the following parameters:

Parameter	Default	Limits	Description
`hookTipLen`	`10 mm`	>= 5 mm	Length of the main arm extending out from the pegboard.
`hookArmLen`	`20 mm`	>= 5 mm	Height/length of the upturned tip.
`hookTipAngle`	`110 deg`	>=30; <=170	Angle of the upturned tip relative to the main arm.
`hookSupportRatio`	`0.5` (`1/2`)	>0; <=1	Fillet/arc support ratio underneath the arm for load bearing.

💡 Preset Configuration Examples

Standard Cable / Utility Hook:
- hookTailLen: 30 mm | hookArmLen: 10 mm | hookAngle: 120° | hookSupportRatio: 0.66
Flat Tool / Shelf Bracket:
- hookTailLen: 45 mm | hookArmLen: 5 mm | hookAngle: 90° | hookSupportRatio: 0.80
Heavy-Duty Deep Hook:
- hookTailLen: 50 mm | hookArmLen: 15 mm | hookAngle: 135° | hookSupportRatio: 1.0

🖨 Recommended Print Settings

Orientation: Print flat on its side so layer lines run parallel to the load path for maximum strength.
Wall Loops / Perimeters: 4 - 5 walls (critical for hook rigidity and hook-peg interface).
Infill: 25% - 40% (Gyroid or Cubic).
Material: PETG, ABS/ASA, or tough PLA.
Supports: None required when printed on its side.