1 / 1
Model Rockets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model Rocket
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- BSD License
Wall thickness is 1.6mm, so best printed with a 0.4mm nozzle. base_swept_12.stl is an experimental 1.2mm wall thickness version.
This rocket flew beautifully with Estes D12-5, but it should work with other 24x70mm motors like Estes C11. See the Open Rocket simulation file.
You can also print 2x 18_mm_motor_adapter and use 18mm motors like Estes C6-3.
There's a shock cord mount near the bottom of base_*.stl. If you mount your shock cord here, make sure it's made of kevlar or some other very heat resistant material.