1 / 1
Model Rockets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model Rocket
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- BSD License
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Wall thickness is 1.6mm, so best printed with a 0.4mm nozzle. base_swept_12.stl is an experimental 1.2mm wall thickness version.
This rocket flew beautifully with Estes D12-5, but it should work with other 24x70mm motors like Estes C11. See the Open Rocket simulation file.
You can also print 2x 18_mm_motor_adapter and use 18mm motors like Estes C6-3.
There's a shock cord mount near the bottom of base_*.stl. If you mount your shock cord here, make sure it's made of kevlar or some other very heat resistant material.