PYLE Microphone Stand Boom Pivot V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for PYLE OEM Microphone stand boom pivot
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Improved mic boom pivot for PYLE tripod base stand (see my other models for additional replacement parts). This accommodates the standard 1/2in/12.5mm boom pole. Adjustment and locking is facilitated by a compression collet and compression nut in a tapered housing. Once set up and adjusted, it only requires about 1/4 turn on the collet nut to loosen/tighten the collet and lock the boom shaft. The stand-mount uses the original hardware: Carriage bolt, washed and lever-nut assembly.
I printed the housing and nut in Sunlu PLA with 3 perimeters and 30%fill. The collet was printed with 3 perimeters and solid fill. All were printed on a Core ONE with .4mm nozzle and .15 structural layers.