PYLE Microphone Stand Boom Pivot V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for PYLE OEM Microphone stand boom pivot
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Improved mic boom pivot for PYLE tripod base stand (see my other models for additional replacement parts). This accommodates the standard 1/2in/12.5mm boom pole. Adjustment and locking is facilitated by a compression collet and compression nut in a tapered housing. Once set up and adjusted, it only requires about 1/4 turn on the collet nut to loosen/tighten the collet and lock the boom shaft. The stand-mount uses the original hardware: Carriage bolt, washed and lever-nut assembly.
I printed the housing and nut in Sunlu PLA with 3 perimeters and 30%fill. The collet was printed with 3 perimeters and solid fill. All were printed on a Core ONE with .4mm nozzle and .15 structural layers.