Jelly Mules | TPU sandals
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print your own jelly mule slides!
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 37
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Attribution — Noncommercial
Having started with TPU recently, I finally got to try my hand at designing my own shoes. These are jelly mules with a grid like cap to just slide into. I printed them with translucent red 90A TPU on a Snapmaker U1, and they came out beautiful!
The footbed is modeled after some of my insoles. For now, the sole is smooth - which probably deserves some additional attention. It prints quicker this way, just know it won't have a lot of grip on smooth or wet ground.
How I printed:
I printed these flat on the build plate, one shoe per plate. This does result in mild hanging on the cap, which didnt bother me. If you know your way around TPU shoe printing better than I do, please adjust arrangement. I simply didnt want to add more printing time and just went for it.
Use PLA for supports
I used 15% gyroid infill
Make sure your filament is well dried and you have the right preferences for your filament.
Take safety precautions regarding air ventilation.
The model fits a size 40-41 (EU), which should correspond to about a 9 (US) or a 7 (UK). You will need to resize this yourself, as I have no experience in sizing wearables yet.