Counting matching models…
I needed a triglide for some 38mm (2.5") webbing to hang a wildlife trail camera. It's even got the grippy teeth things to keep things good and secure. You can ignore the imperfection on the part in the photograph, that was due to me…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Printing a floating spiderweb mid-air and direct print a spider on it, all without support? Is it possible? The original idea. I can't remember exactly when this idea originated in my brain (probably short circuit), but after the many…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
I needed a replacement for my Weber Spirit grill knob. So I made one in the style of the knobs on a Marshall amplifier. I printed mine in Galaxy Black ASA and then switched to PLA (Viva la Bronze) for the top part. I added a GCode file…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
I remixed this for a friend so that it would fit the notch on the 2021 MacBook Pros. Don't print higher than .15 for best results. Going lower is okay but maybe not necessary. Remixed from: https://www.thingiverse.com/thing:3034483
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Holder is made from two parts and additional parts are not needed Mounting part fits directly to Weber Spirit Grill (probaby to others as well). It has Fish tail mechanism to lock the two pieces together, but there is also possibility to…
Print approx. €4.44–€5.42 excl. taxPreliminary estimate for one variant
Replacement end cap for front leg on Weber grill. Extends the leg length 20mm (13/16") so the grill surface is level. Fits 1" (25.4mm) diameter legs. Printed with PETG for outdoor use. Printed with a brim and no supports. 40% infill. 0.2…
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to fasten down my hot tub cover with 2 inch webbing, so I purchased this “Plastic Buckles, Heavy Duty Side Release Buckles, Dual Adjustable parachute buckle, Plastic clips for Webbing straps (2 Inch,4 Pack)”. I needed to mount…
Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant
I needed some form of document camera to be able to digitize hand-drawings reasonably fast. Since they're 60+ Euros and I had a webcam around I decided to build a stand for the webcam. Additional material required: 2x40cm 8mm…
Print approx. €3.68–€4.49 excl. taxPreliminary estimate for one variant
Weber has a line of ‘add-ons’ to their grills. I just bought a new bbq grill from them and wanted to make my own rather than spending tons (more money I guess) on their products. I measured the rail of the Weber spirit grill side table…
Print approx. €7.93–€9.69 excl. taxPreliminary estimate for one variant
The rotating vise can hold webcams with a maxiaml width of 9cm. You can print it out in two ways. If you choose you want the mount for Ender 3 pro with an open (out) link then you have to print the rail mount with a close (in) link … then…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
This is a webcam cable channel for hiding a webcam's cable within a XL enclosure. It has slots for two 20x5x2mm magnets and could honestly be used for anything you wanted to hide that is 3.5mm or less in diameter. Quick build using…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
This is a super easy Step-by-Step guide and model set for making your own custom QR Codes using only a single color of filament. While you can still use a different color at the last 2-3 layers if your printer supports that, it is…
Decorate the frames of your doors
A parametric FreeCAD model, within the spreadsheet there are 3 simple parameters: Width - set the width of the nylon strap you wish to make a buckle for EndThickness - set the thickness of the material on either side of the strap Depth -…
To assemble this little web shooter you can use a 4mm diameter spring or even a pen spring, and for the tip of the projectile you can use 5mm diameter neodymium magnets. When assembling it, the cartridge will be attached to the body of…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
Spiderweb wall decoration You can create modern decoration with low use of materials. Infill: 100% Layer height: 0.2mm
prints in about 2 hours with .2 mm layer,15% infill and 2 perimeters
Coasters Spiderweb Prints easily, no support needed. Box designed to hold up to 4 coasters. Print settings : - 10-15% infill - 0.2mm layer height - PLA Black and White from Ariane plast All my designs are copyrighted, so you can't sell…
I was driven to create this as the official caddy in Australia is pretty expensive. This upload also includes hex hooks for hanging accessories off the tool caddy itself! Print the tool box in the orientation shown, i printed it in PCCF…
My new room decoration is done. I still have a lot of glowing in the Dark Filament left and it was perfect for that.
I had an old phone I could plug into a power supply and use to display my print progress on PrusaConnect, so I threw these together to safely hold it to the top rail aimed at my print. There are two versions: The first one snaps on the…
A stackable coaster to celebrate the successful launch of the JWST! - Comes in both stackable and plain versions (with and without knobs) - Comes in two sizes (max cup base 76 mm and 90 mm) - Print with color change at > 1 mm
A nice webcam mount for your Ender 3 v2. It is a friction fit on the right side of the x carriage and can accomodate many webcam models, although the hole is sized for the Microsoft LifeCam mounting screw. I designed it to be lightweight…
I lost the battery cover for my wireless mouse and got tired of the battery and USB receiver falling out. The cover is a pressure fit and is a little difficult to take off. I recommend printing in PETG. PLA tends to deform over time. Also…
Spooky spiderweb decoration to tack in the corner of a doorway.
Description: A spooky and stylish spinning top in the shape of a spiderweb, created especially for Halloween. Width: 50 mm Unique web-inspired design with an easy-to-grip handle for smooth spinning. Can be printed either as a single solid…
My work backpack straps kept slipping every time I slung and unslung my bag. So instead of buying I designed these in Fusion 360. Photo is of an earlier model, files are slightly closer fit and more chamfered. Source file included.
This is a mount for the Microsoft HD-3000 Webcam onto a Lack enclosure (or any other 90 degree corner). The webcam just slots in the gap. Mounting is via 2x #10x0.5" (4.8mmx13mm) Pozi Flanged Panhead screws which i find always work well.…
Mount for 3D printer for Logitech webcam
Print Details: 0,35mm layer height colour change at 1,25mm Fusion model included.
This is a quick release mount to attach a Elecrow ThinkNode M1/M5 to 25mm webbing. Build notes You will need two M2*4mm hex bolts to attach the back plate to the device. PETG is preferable to allow for a bit of flex on the release tab.…
This is a remix of my https://www.thingiverse.com/thing:5756307 since someone requested a version for the Wyze webcam version 3. I want to thank burke9119 for the webcam mounting plate i copied from his…
A camera cover with a cutout for a microphone or a light sensor. Perhaps it will be a matching spacing of holes for your monitor. The edges used are multiples of 0.4 mm long. Sharp ends R0.2 mm. To complete the model you will need a tool…
is was specifically designed for the Logitech C615 but I'm sure it can work for many more models as the mounting part seems likely to be standard for a wide reference of webcams, and fairly easy to modify to fit specific references. Also…
I used a couple of m3 screws to tension the bits together and it seems to hold my brio webcam pretty well. Not perfect but functional. Should work for other cameras with a similar ¼-20 mount Edit a while after: Recommended to print in…
The method of connecting the nested wire elements to the antenna spreaders is poor, so I designed these alternative hangers. One for each corner of each element.
Simple webcam mount for Logitech C525 webcam for the inside of lack table enclosure.
The well known Weber kettle BBQ unit comes with two usable wheels on to the rear legs, and a front leg which needs to be lifted before the rear wheels can be used. Lift it a tad too far, and the whole unit topples. Err on the safe side,…
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant 12/26/25- Added Barrel spacer. Finally got my fx-3 spring. Using Nutty's hijinx catch 3 (Because I went with no ptfe as I…
This machine is designed to automatically measure, mark key locations, and then cut webbing or cord for production purposes. These files are provided as is, the model was assembled and tested to be working properly, and the firmware was…
Add a touch of spooky charm to your Halloween setup with the Pumpkin Spiderweb Tray – a festive piece that’s as practical as it is eye-catching. This 3D printed tray is designed in the shape of a classic pumpkin, with a beautifully…
Simple Logitech Webcam C930e mount for PrintClosure Uses original M3 hole in the corner of the enclosure. Additional: ¼ inch camera screw ( Like this one )
Made this to fit my friend's weber genesis. 9mm key hole.
A shelf that attaches to the holes in the interior wall of a Da Vinci 1.0, 1.0A, and 2.0 printer, to mount a webcam (or other accessory). Specifically, I am using the TeckNet C016 USB HD 720P Webcam, 5 MegaPixel, 5G Lens, USB Microphone &…
Smaller remix from Webcam cover by mitpro: https://www.thingiverse.com/thing:2754874 I decided to remix it 'cause I needed a smaller one, without extended bands at the sides. Easy to print, no supports neither raft but 100% infill to make…
This is a brake block for the wheels of a Weber Spirit Grill. It is intended for the wheels with the nose coming out on one side. There are two versions of the block. Depending on how you have your grill placed, you might need a different…
A puzzle inspider by a spider web There are 2 different files: - NO AMS version, one color per plate - AMS version with minimized color waste Print in single color for a greater challenge!
Print in any material. - I used PLA. Ideally, use black, but any colour works and doesnt impact/tint video feed. Attach with some removable adhesive or double sided tape. (I used the tape) This simple model is only ~3g, which is perfect…
Designed in tinkercad, printed on ender 3.
Holds your webcam at an angle to livestream your 3d prints!
This is a webcam mount primarily made for the DuEnder project. The reason I made it is because with this form of CoreXY printer, I was having trouble the webcam shaking violently during printing, causing bad video quality. This mount…
Remix but for looped webbing. Mix and match, have one side adjustable and one looped if you want Remix and compatible with the original
Make sure to take apart your webcam and see if the board matches the one shown in the image. I'm not sure how else to identify the model; if you have any ideas please leave a comment. The case snaps shut, but should still be easy enough…
This is my take on a Webstor from Masters of the Universe. You might need to resize it to suit your RPG needs.
The James Webb Space Telescope (sometimes called JWST) will be a large infrared telescope with a 6.5-meter primary mirror. The project is working to a 2018 launch date. The Webb will be the premier observatory of the next decade, serving…
Alojamiento para placa OpenTheremin con motivos de telaraña.
I designed this model to proper light my face for online classes/meetings. It is simple model design to fit: https://www.printables.com/model/354990-monitor-mount-for-clamp-on-camlights Rigid Mini USB LED Strip 5V Micro USB Port DIY LED…
You can grab a code and get more info about the project here https://github.com/Andryushik/blinds_homekit_esp32 Created for regular window blinds. With Planetary gearbox (you need 3 x planet_gear for 1 set). You need three M3 bolts with…
Box Generator visit https://box-generator-3pl.pkroaming.com Box Generator is a browser-based parametric design tool for creating custom 3D-printable electronics enclosures. Users can configure rectangular or cylindrical boxes, preview…
The ignitor cover is unavailable as a replacement part, ignitor unit costs over $20. You can replace the failed rubber cover with this cover made from TPU or other flexible fillament. Make several and keep on hand. I've needed this part…
Turn your Pixel 8 into the ultimate webcam for your ThinkPad! This bracket was specifically designed to bridge the gap between the Lenovo ThinkPad L13 Yoga and the Google Pixel 8 . With the release of the native "Webcam" mode in Android,…
I wanted to have a nice budget microscope and bought a cheap usb one . It is good enough for the price (7€) but even with a good light source it didn't get a nice quality image. I disassembled it and found that the main parts consists of…
teachingtech flexible octoprint webcam mount for 3030 extrusion
This will clip on a 34mm handlebar VERTICAL stem. the holes fit the 32 inches ozark trail bamboo skewers from walmart, just clip the pointy end. I extended mine a bit further as I'm taller than average. The forward angled stops the web…
eine netter kleiner Anhänger für Rucksack, Schlüssel oder Tasche
Logitech HD Webcam C270 support Camera Raspberry video de surveillance
Print the endcaps and latches from the original fileset, exact same hardware Orange box in picture is the original size for comparison otherwise this is just longer by 3cm.
Replacement grips for Weber grill tongs. Printed in TPU, .1mm layer height. Fits with no slop.
Want to use your phone as a webcam, and already own a Quadlock case? This part might help you. Very easy to print, I used the default printer settings, as shown in the screenshot. The support was removable almost without traces. License…
This is the Vivaldi (web browser) logo with backside and two different hole sizes to be put on a keychain, backpack, etc. with a keyring for example. Object Z-hight should be 2.5mm. Scale the other two axis to your liking Provided are…
A two-body cycloidal drive assembly prepared for CAD review and mechanical simulation. Includes two STEP bodies for importing into your preferred CAD or CAE software. Created with AI assistance and curated by WebCAE. Author:…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
For Weber Tire Changer Motorcycle Clamps (maybe others too) Inner diameter 82 x 61,5 mm
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
compatible avec les télécommandes Webasto d'origine VAG
Two parts. Made to fit a countersunk M4 bolt. Use a thread tap to get the threads smooth. 25mm is standard width but found out that some webbing is slightly wider so made one 26mm. Melt a hole in the webbing for the bolt to go through.…
I used a couple of m3 screws to tension the bits together and it seems to hold my brio webcam pretty well. Not perfect but functional. Should work for other cameras with a similar ¼-20 mount Edit a while after: Recommended to print in…
Spiderweb-designed coaster with a built-in reservoir to collect condensation from cold drinks in warm environments. Say goodbye to table stains! Designed in two interlocking pieces , allowing you to print it in different colors or…
Make sure to take apart your webcam and see if the board matches the one shown in the image. I'm not sure how else to identify the model; if you have any ideas please leave a comment. The case snaps shut, but should still be easy enough…
Camera centering jig ! I used cable holders from WoTanCZSK @WoTanCZSK_1608491 to guide the camera cable.
This is a housing for a XIAO ESP32 S3 cam for a Prusa XL. Print out all parts according to your color preferences. To assemble the case, use some glue and glue the joint ball part to the bottom of the case. Then stick a suitable magnet…
GoPro Mount / Webcam mount for 3030 Alu Profile / 3d Printer - Staffa montaggio per profilo 3030 / Stampante 3D Suitable for: https://www.printables.com/model/1171796-gopro-mount-extension-estensione-per-gopro…
This is a Multiboard remix of martin.zellner 's webcam holder for the DJI OSMO Pocket 3 gimbal camera . Martin's design attaches to an IKEA Skådis peg board, where I instead have updated it for Multiboard. Use standard Multiboard…
E N G L I S H This is a modular, tool-free, plug-in arm for a webcam for the Creality Ender3 V3 KE and printers with the identical Z-axis. No screws or glue are required. The holder is clamped onto the right-hand Z-axis cover and then…
E N G L I S H Suitable for: Artillery Sidewinder X3 Pro/Plus and X4 Pro/Plus. Features: no screws no glue no tools modular very many viewing angles universal fit holes for cable ties Foldable Print out of PETG, clip on and plug together…
The model allow mounting a lightbar or a webcam on OLED monitors with 5 mm thick screens, with a curvature of 1800R. Printed in PLA, no special features needed.
The 90-degree elbow reducer is used for hot air heating from 3.5" to 2.5". PA-cf recommended for temperature resistance
A few 1:1 scale replicas of the Webley .455 cartridge used in their famous revolvers. The Mk III is the “Manstopper” round, developed in 1898 and banned the following year. The MkVI is the standard round used in both world wars and is…
I wanted to have a nice budget microscope and bought a cheap usb one . It is good enough for the price (7€) but even with a good light source it didn't get a nice quality image. I disassembled it and found that the main parts consists of…
*Heat-set inserts required* Thank you for checking out my model. The problem this model aims to solve is that I would have to take off my webcam every time I wanted to rotate my monitor. It also provides a stable mount for the webcam…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
A remixed webcam mount with a perfect view of the nozzle.
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant 12/26/25- Added Barrel spacer. Finally got my fx-3 spring. Using Nutty's hijinx catch 3 (Because I went with no ptfe as I…
This simple print can make make any room a haunted house in just minutes! Black PETG remains fully opaque with just two layers (at .2 thickness) Scale to any size and tape/glue to any surface for an instant Halloween accentuation
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
