Webcam step for thin-framed monitors
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.74 – €0.91 net (excluding VAT)
For file: webcam_step_0.2mm_PLA_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.83 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 53.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Elevate your view on thin-framed monitors with the Webcam Step! Say no to webcam screen invaders ⬆🖥📷⬆
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 144
- Makes
- 4
- Views
- 768
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Webcam Step: Elevate Your View
Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the screen and obstructing our view, whether it's an entire tab title in your browser or a crucial detail in a video call.
👉 Introducing the Webcam Step 👈—a simple yet effective solution. By raising your camera approximately 14mm above the monitor's frame, this step ensures a clear view, unobstructed by annoying webcam placements.
Designed for the Logitech C505 webcam, this step also accommodates other popular models such as the C920, as well as various webcams from different brands, making it a versatile addition to any setup with thin-framed monitors.
Installation
- Place your camera on top of the step
- Secure it in place using the 2nd piece (the ratchet). A rubber band would work as well.
- Position the webcam onto your screen.
Print instructions
- Material: PLA, but PETG or similar works as well
- Layer height: 0.2mm (0.3mm should work as well)
- Infill: 15%
- Supports: no supports required. Follow the orientation as shown in the 3mf file
- Consider sequential printing
Attribution
Although this model is not a remix, I want to give credit for inspiration to two other models/creators:
- https://www.printables.com/model/433272-camera-holder-for-c505-hd-webcam by @RolfKreibaum_165744
- https://www.printables.com/model/644093-universal-self-locking-fastener-screwdriver-cables by @MeisterEdel