Spiral bitholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand for hex shanked drill bits This is a remix of hex bit holder by Fitzterra…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 1
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A stand for hex shanked drill bits
This is a remix of hex bit holder by Fitzterra (https://www.thingiverse.com/thing:1686330). However, this remix evolved until it is now almost completely, but not entirely, unlike the original, and has the following features:
- Stepped spiral layout of bits
- Mostly parameterised
- A central hole with a larger clearance for a stepped drill
- Cutouts showing bit size are an artefact of the spiral drawing technique, and go all the way down to the bottom of the bit.
- Hex or round holes
- Extended base for added stability
- Just for fun, the base and centre platform are hexagonal
To do (but probably won't ever get done. Remix it!)):
- Make the outer surface a smooth curve, (and a circular base to match)
- Make the top surface smooth instead of a staircase
- Allow users to optionally add outer sides to the holes
- Parameterize base size
- Fillet corners
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Resolution:
Not very important... I printed with a 0.6mm nozzle
Infill:
15%, but could probably be zero
Filament:
Chinese cheapo PLA, but any material should be OK
Red
Notes:
I set minimum shell thickness to 1.5mm
Category: Tool Holders & Boxes