1 / 10
Magnetic external prime bucket for C1 INDX - Vase & Standard — image 1
1 / 10

Magnetic external prime bucket for C1 INDX - Vase & Standard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Recreated external prime bucket to use without assistance of right side spoolholders

Rating
4.417 / 5
Likes
91
Downloads
274
Makes
13
Views
1,551
Reviews
12

Updated at source:

Model information

License
Open Community License v1.1

Original external prime bucket is made to be held in place by spoolholders. These prints ads magnets to snap to the right side panel.

This version is NOT Prusa original extended bucket but with magnet. It have different dimensions, as I couldn't line original in CAD without clipping into side panel. It is created from scratch, with inspiration of the original extended bucket.

Made for 20x6x2 magnets and a bit of glue (slightly oversized holes)

Confirmed working:

  • Angle correction plate - TESTED

    • Basically just to make level plane for the bucket to sit on

    • 5x holes for magnets, choose how many you'd like to insert, use of glue required (magnets are on the bottom)

  • Vase mode 150mm - TESTED with 0.6 nozzle with 0.32 layer height

    • bucket height is 150mm

    • 4x holes for magnets, use of glue is recommended (to prevent magnets catapulting or falling off from prime bucket during emptying)

    • Check magnet holder outer walls. It was brought to my attention possible problem with magnet holders and perimeter extrusion width

correct magnet holder

incorrect magnet holder

Check Print setting - Advanced - Extrusion width:

Perimeters and External perimeters

It should be set to less than or equal to 0,8mm or it will skip the holder outer wall

  • Vase mode 240mm - TESTED with 0.6 nozzle with 0.32 layer height

    • bucket height is 240mm

    • 4x holes for magnets, use of glue is recommended (to prevent magnets catapulting or falling off from prime bucket during emptying)

    • Check magnet holder outer walls.

  • Standard (solid) mode 150mm - TESTED with 0.6 nozzle with 0.32 layer height

    • Should allow some multicolor customization

    • bucket height is 150mm

    • 4x holes for magnets, use of glue is recommended (to prevent magnets catapulting or falling off from prime bucket during emptying)

  • Standard (solid) mode 240mm - TESTED with 0.6 nozzle with 0.32 layer height

    • Should allow some multicolor customization

    • bucket height is 150mm

    • 4x holes for magnets, use of glue is recommended (to prevent magnets catapulting or falling off from prime bucket during emptying)

Project files:

https://cad.onshape.com/documents/17d41fb460db0d05b1227ebb/w/2ee2db712a550a96b1b35b7f/e/91a4b129253ca964b2bba2bd

Edits:
20260813 - added 240mm Tall vase bucket, WIP, need testing
20260814 - solid 150mm bucked tested and verified, solution for missing outer wall on magnet holders in vase mode
20260815 - Vase mode 240mm bucket tested and verified, added version for 20x6x3 magnets(only Tall vase), verified functioning with Handle-Hatch mod, updated description; added Tall solid, WIP, need testing
20260817 - Solid 240mm tested and verified
20260824 - reuploaded 240mm bucket with 20x6x3 magnets, as I was notified on problem with its scale
20260831 - added clarification about Prusa original extended bucket

Unless something comes up, this project is now complete

Tags