1 / 1
Small Tracts Holder — image 1

Small Tracts Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Tracts Holder for Tracts around 84mm by 108mm.

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Printing

  • Material: PLA but will probably print in most stiff materials

  • Layer height: 0.30mm is fine especially if printing a lot

  • Bed adhesion: you need decent adhesion, because the first layer isn't that big. Unfortunately some warping is common with the given design constrains

Features

  • The irregular hexagonal opening on the front is designed to be easy to print without sacrificing usability or introducing sharp edges. It serves two purposes: it lets you quickly see whether there is at least one tract inside, and provides enough access to use your thumb to slide one out or hold the stack securely in place.

  • The edge at the top is to make inserting tract easier and quicker.

Final Notes

It has been tested in the field by friends and family, so far has been a success. The only mayor hurdle is the bed adhesion can be a bit troublesome. But so far i found my design to be a greatly appreciated.

Tags