1 / 1
Adapter for SimCore PF1 Pedal-Pad on Heusinkveld Sprint — image 1

Adapter for SimCore PF1 Pedal-Pad on Heusinkveld Sprint

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

SimCore PF1-T (Throttle) and PF1-B (Brake) Pads. For Heusinkveld Sprint only.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This part (specially the brake) have to take quite high forces. Therefore I highly recommend to print it with Fibre reinforced filament (ie. PETG-CF or PA-CF). I finally used PA12-CF. Don't even think about PLA.

0.2 mm layer height
5 walls
5 bottom and 5 top layers.
25 % infill with 3d Honeycomb oder TPMS-D Cell

I recommend to use PLA for the interface between the support and the model for easy removal.

Per pedal you need two additional M6x10 scews

Version 1:
Remove the original Heusinkveld Pedal Plate und use the srew to mount the adapter to the pedal.
Use M6 screws to mount the SimCore Plates to the adapter

Version 2:
For more stability I increased the thickness and prepared the hole for a threaded insert. Use a short M4x4.0 insert. I recommend to melt the insert from the front side (where the plate ist monted) You need an additional  M4x8 flat head screw an a washer with at least 1mm.
- V2a: I incresed the thicknes by 1mm to make it more rigid. (V2 files removed)

The Picture shows a test piece printed in ASA. It works, but for long term use I would recommend carbon fibre reinforced materials.