1 / 3
Zryv: an hydrofoil RC boat at 1:33 scale — image 1
1 / 3

Zryv: an hydrofoil RC boat at 1:33 scale

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a bigger version which should be more seaworthy (pondworthy !) It's 83 cm long.

Rating
0 / 5
Likes
30
Downloads
186
Makes
0
Views
881
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

I hope this bigger version can really navigate and rise on the foils...

We now need 

  • a 2216 motor preferably at least 1300 kV , 2000 is better

  • a 30 A ESC or better

  • a MG90S servo

  • a propeller shaft from Raboesch (model 300-01  270mm/210 mm long 4mm shaft 7mm external tube diameter

  • a 30mm propeller from Raboesch 170-04

  • a spring coupler ca 25 mm long: we need a 4mm (motor shaft)  to 4 mm (propeller shaft) adapter

  • a 2S or 3S or 4S battery  depending on the kV of your motor (the shaft can go up to 14500 rpm) but the lighter it is the better... This means small mAh (1100 max)

For mounting tips (mostly the foils) look at my original model here .

You will need a few M3 screws for the motor , the motor bracket and the servo bracket.

Printing some parts of the foils is tricky ; look at my print files for ideas...

The way this is supposed to work: The prop digs into the water and lifts the front foil; with speed the front of the boat stays out of the water and the rear foils come out also because it is angled up. Provided the shapes and the hydrodynamics are correct (!)

Tags