Raspberry Pi Zero 2 W WeAct 2.9 inch e-ink desktop enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desktop enclosure for the Raspberry Pi Zero 2W with a WeAct 2.9" e-ink display styled after digital alarm clocks
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Desktop enclosure for the Raspberry Pi Zero 2W with a 2.9" e-ink display styled after digital alarm clocks. The e-ink used is a WeAct 2.9" black-white module which is SW compatible with the Waveshare 2.9 BW V2 module, supports 4 level grayscale.
Parts needed:
WeAct 2.9'' black-white e-ink display (available from Aliexpress)
Raspberry Pi Zero 2W
2x20 female header
4x M3 heat-set insert
4x M3x5 screw
Print instructions
Body:
- PLA or PETG, 0.4mm nozzle with 0.13-0.15 mm layer height. Print with the front facing down towards the build plate, no supports needed
Back panel:
- PLA or PETG, 0.4mm nozzle with 0.13-0.15 mm layer height. Print with the back facing down, use regular supports
Screen bracket 2x:
- PLA or PETG, 0.13-0.15 mm layer heights, use precise z-height
Assembly:
You'll have to create your own cable to adapt the display to the raspberry GPIO header, use the Mx1.25-8p cable supplied with the display and the 2x20 header. The wiring is copied from the waveshare 2.13 e-ink hat:
Once the cable is complete the whole unit can be assembled as pictured bellow:
SW:
Use the waveshare epd library, the WeAct 2.9" BW display is compatible with the epd_2in9_V2 software library and examples