Additional handlebars for xiaomi scooter 6 ultra
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional handlebars for xiaomi scooter 6 ultra.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
You need 4x 6mm allen bolts, 30mm long.
I might have gone a bit overkill with these print settings, but when it comes to safety and mechanical stress, I wanted to be 100% sure it wouldn't fail!
(Note: During my test print with these heavy settings, I experienced a bit of PETG warping, so make sure your bed adhesion and draft protection are dialed in.)
Printing possition: Must be printed on flat.
Material: PETG (Strongly recommended for impact resistance, flex tolerance, and outdoor UV resistance. DO NOT USE PLA as it is brittle and prone to sudden sharp fractures).
Wall Loops / Perimeters: 10 walls (Provides extreme shell strength and torsional rigidity).
Infill: 60% (Gyroid or Cubic pattern recommended for high omnidirectional strength).
Top / Bottom Layers: 10 solid layers (Maximum top/bottom skin strength and impact resistance).
This 3D model is provided "as is" for educational, personal, and DIY hobby purposes only. The designer assumes no responsibility or liability for any injury, loss, or damage to health or property resulting from the download, printing, assembly, or use of this part. You are using this model entirely at your own risk.