1 / 3
Wall Mount for Seeed Studio reTerminal D1001 8" LCD Touch Display — image 1
1 / 3

Wall Mount for Seeed Studio reTerminal D1001 8" LCD Touch Display

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple wall mount for the Seeed Studio reTerminal D1001 8" LCD Touch Display

Rating
0 / 5
Likes
4
Downloads
8
Makes
0
Views
153
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I picked up a Seeed Studio reTerminal D1001 8" LCD Touch Display to program as a central smart home control pane. You can get the device direct from Seeed Studio here https://www.seeedstudio.com/reTerminal-D1001-p-6729.html (not an affiliate link or anything like that).

I wanted to mount it to the wall. It has VESA mounting holes on the back as well as a eyelet thing for a hook (hanging it on one hook seems like a terrible plan for stability when you're going to be poking it all the time).

I decided to design a part that uses the VESA holes to attach to the device and a mating part that it can then slide in to. While I am really only using it mounted permanently on the wall, technically the mount is designed so you can slide it back out whenever you want and use the device on battery power.

The wall mount also has cable runs along the bottom in case you want to route the power cable out the side instead of straight down.

Prints easily with minimal tree support.

For stability I would recommend using all four holes both to attach the part to the device as well as to attach the mount to the wall. However you could probably get away with only using two diagonally apposed holes. I included the hole for the central eyelet just in case but I cant imagine any need for it (if you were going to hang the device like that you wouldn't need this mount).

Note: the cable cover running down the wall in the third image is not part of this model. It's something else I have been working on and will probably upload as well at some point.

Tags