1 / 7
Feel Better Syringe (Tactile dosing for the visually impaired) — image 1
1 / 7

Feel Better Syringe (Tactile dosing for the visually impaired)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tactile syringe concept letting visually impaired people feel dosage marks by touch instead of reading them.

Rating
0 / 5
Likes
3
Downloads
2
Makes
0
Views
213
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

See images for printing and use instructions

Feel Better Syringe (Tactile dosing for the visually impaired)

A concept design demonstrating how a syringe could be read entirely by touch, so people who are visually impaired could measure medication doses for their children or pets without needing to see the markings. This is the 10mL version of the concept.

⚠ This is a proof-of-concept demonstration model. It is NOT a functional syringe and cannot be used to measure, hold, or administer real medication. See the Legal and Safety Notice below.

Why the name? Feel Better works on two levels. The device is operated entirely by feel, no sight needed to know how much liquid is in the tube. And the whole point of giving a dose correctly is so someone, whether a child or a pet, actually starts to feel better.

Project Overview: Standard syringes rely entirely on printed volume markings that require sight to read accurately. For people who are visually impaired, this creates a real barrier to something as basic and important as giving medication safely to their children or pets. Feel Better Syringe explores a tactile alternative: a tube with fingertip-readable ridges standing in for printed measurement lines, paired with a plunger extension that lets you track your progress as you draw or dispense liquid, all without looking.

How Feel Better Syringe works: The tube has ridges running along its length that mimic a screw thread, spaced to represent volume increments instead of printed lines. Every 1mL mark is a full circle you can feel wrap all the way around the tube. Every 0.5mL mark in between is a partial ridge, broken into four sections, so your finger can immediately distinguish a full mL mark from a half mL mark just by how much of the circle it feels.

The plunger has a second, thin extension running parallel to the main shaft, ending at exactly the same point as the plunger tip, but positioned on the outside of the tube instead of inside it. As you pull the plunger, you rest a finger on the edge of this extension and feel it pass over the ridges on the tube. Since the extension tip always lines up with the actual liquid level inside, counting the ridges under your finger tells you exactly how many mL you've drawn, entirely by touch.

The housing includes a large open cutaway on the side, so you can see and feel the mechanism working from the outside.

What makes Feel Better Syringe worth printing

  • Demonstrates a genuinely tactile approach to a real accessibility gap in medication dosing

  • Scaled to 10mL, a common real-world dosing size for children and pets

  • Ridge system marks 1mL and 0.5mL increments, distinguishable by touch alone

  • External plunger extension mirrors the internal liquid level so it can be tracked by touch

  • Open cutaway housing lets you see and feel the mechanism working

  • Free to download, study, and build on, with the STEP file included for editing

⚠ LEGAL AND SAFETY NOTICE

NOT A MEDICAL DEVICE: Feel Better Syringe is a concept demonstration prototype. It has NOT been evaluated, approved, tested, or endorsed by any medical or regulatory body (such as Health Canada or the FDA), and it is not capable of safely holding or administering medication. It must never be used to measure or give real medication to a child, pet, or anyone else.

USER IS THE MANUFACTURER: By downloading these files, the user acknowledges they are the manufacturer of any physical object printed from them and assumes 100% responsibility for material selection, print settings, and use of the printed object, understanding that it is not fit for real medical use under any circumstances.

For complete Terms of Use and liability information, visit: https://www.tryspire3d.com/disclaimer-and-terms-of-use

Print Settings Rafts: no Supports: no Brim: no Resolution: 0.2mm Infill: 30% (gyroid) Wall count: 5 Filament material: PLA (for tube and plunger) and TPU95A (for rubber tip) Note: Print outer layer first for more accurate measurements

Support and Updates This design is a work in progress. If you would like to support future Tryspire projects, consider visiting Ko-fi. Website: https://www.tryspire3d.com/ Ko-fi: https://ko-fi.com/tryspire3d Instagram: https://www.instagram.com/Tryspire3d/ TikTok: https://www.tiktok.com/@tryspire3d Youtube: https://www.youtube.com/@Tryspire3D

Tags