1 / 3
Xshot Spinshot/Break Barrel Non-Rifled — image 1
1 / 3

Xshot Spinshot/Break Barrel Non-Rifled

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Same EXACT model as the original, with one minor change. Removed rifling for a smooth bore. That's it!

Rating
0 / 5
Likes
4
Downloads
14
Makes
0
Views
233
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

It's all in the title! Same amazing creation by @FoamProArmory with a single change.

Removed the rifling and smoothed out bore for a 12.9mm ID
Took a caliper to it afterwards to confirm

Printed in PETG

Print settings:
Layer height: 0.12  (Can be printed at larger layer heights, I did this to make the inside smoother)
Infill: 25% 
Infill Pattern: Rectilinear
Supports: YES - Tree Supports 
Scarf Joint Seam (to smooth barrel, mine came out perfectly round and smooth)
Brim if needed for adhesion


Print upright with muzzle down 

Tags