Xshot Spinshot/Break Barrel Non-Rifled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same EXACT model as the original, with one minor change. Removed rifling for a smooth bore. That's it!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
It's all in the title! Same amazing creation by @FoamProArmory with a single change.
Removed the rifling and smoothed out bore for a 12.9mm ID
Took a caliper to it afterwards to confirm
Printed in PETG
Print settings:
Layer height: 0.12 (Can be printed at larger layer heights, I did this to make the inside smoother)
Infill: 25%
Infill Pattern: Rectilinear
Supports: YES - Tree Supports
Scarf Joint Seam (to smooth barrel, mine came out perfectly round and smooth)
Brim if needed for adhesion
Print upright with muzzle down