Pocket Tic-Tac-Toe with Storage Box

A complete travel tic-tac-toe set: the lid flips over to become the board, and all ten pieces store inside the box.

WHAT YOU GET

• 01_Kutu_Alt.stl -- box base

• 02_Oyun_Tahtali_Kapak.stl -- lid with the 3x3 board on the outside

• 03_X_Tasi_5_Adet.stl -- five X pieces

• 04_O_Tasi_5_Adet.stl -- five O pieces

• 00_Tam_Set_Baski_Tablasi.stl -- the whole set on one plate

KEY DIMENSIONS (mm)

• Box: 72 x 72 x 14

• Piece diameter: 16

• Piece count: 5 X + 5 O

PRINT SETTINGS

• PLA or PETG, 0.20 mm layers, 3 walls, 15% infill

• Everything prints flat with no supports

• The ready-made plate already contains 5 of each piece

ASSEMBLY

The thin rim of the lid is a friction fit into the box. To play, flip the lid over and use the 3x3 board on its outer face. Pack the pieces back into the box when you are done.

PLEASE NOTE

Small parts, not suitable for children under 3.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.