1 / 1
Parasol Pole Hanger - 4 Hooks for Bags and Towels — image 1

Parasol Pole Hanger - 4 Hooks for Bags and Towels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A snap-on ring with four hooks that gets beach bags and towels off the sand and onto the pole.

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution — Noncommercial — Share Alike

A snap-on ring with four radial hooks that gets your beach bags and towels off the sand and onto the umbrella pole.

WHAT YOU GET

• Semsiye_Diregi_4lu_Aski.stl -- single-piece 4-hook ring

KEY DIMENSIONS (mm)

• Pole nominal diameter: 30.4

• Flex opening: 6.8

• Hooks: 4

• Overall diameter: 94

PRINT SETTINGS

• PETG recommended, 0.24 mm layers, 4 walls, 30% infill

• Print the ring flat, small supports may help at the hook tips

ASSEMBLY

Press the flexible C ring onto the parasol pole from the side. Hang bag straps and towel loops on the four hooks, and try to spread the load evenly around the ring.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.

Tags