Folding Hanger for Wet Swimwear and Socks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Opens to 230 mm for a swimsuit and four pairs of socks, folds to hook size for the suitcase.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Opens to about 230 mm to dry a swimsuit and four pairs of socks, then folds down to hook size for the suitcase.
WHAT YOU GET
• 01_Merkez_Kanca.stl -- centre hook
• 02_Sol_Katlanir_Kol.stl -- left folding arm
• 03_Sag_Katlanir_Kol.stl -- right folding arm
• 04_Mentese_Pimi_2_Adet.stl -- hinge pins (print 2)
• 00_Tum_Parcalar_Baski_Tablasi.stl -- all parts on one plate
KEY DIMENSIONS (mm)
• Open width: approx. 230
• Small hangers per arm: 4
• Pivot: 4.4 dia
PRINT SETTINGS
• PETG, 0.20 mm layers, 4 walls
• All parts print flat, print 2 of the pin
ASSEMBLY
Bring the rounded ends of the arms up to the two pivots on the centre piece and push the pins through. The arms swing out in use and fold in towards the centre for travel. Drape the swimsuit over the arms and hook socks into the open slots.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.